lkml.org 
[lkml]   [2018]   [Mar]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH 0/2] regulator: add QCOM RPMh regulator driver
Date
Hello,

This patch series adds a driver and device tree binding documentation for
PMIC regulator control via Resource Power Manager-hardened (RPMh) on some
Qualcomm Technologies, Inc. SoCs such as SDM845. RPMh is a hardware block
which contains several accelerators which are used to manage various
hardware resources that are shared between the processors of the SoC. The
final hardware state of a regulator is determined within RPMh by performing
max aggregation of the requests made by all of the processors.

The RPMh regulator driver depends upon the RPMh driver [1] and command DB
driver [2] which are both still undergoing review.

Thanks,
David

[1]: https://lkml.org/lkml/2018/3/9/979
[2]: https://lkml.org/lkml/2018/3/14/787

David Collins (2):
regulator: add QCOM RPMh regulator driver
dt-bindings: regulator: add QCOM RPMh regulator bindings

.../bindings/regulator/qcom,rpmh-regulator.txt | 246 +++++
drivers/regulator/Kconfig | 9 +
drivers/regulator/Makefile | 1 +
drivers/regulator/qcom_rpmh-regulator.c | 1124 ++++++++++++++++++++
.../dt-bindings/regulator/qcom,rpmh-regulator.h | 40 +
5 files changed, 1420 insertions(+)
create mode 100644 Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.txt
create mode 100644 drivers/regulator/qcom_rpmh-regulator.c
create mode 100644 include/dt-bindings/regulator/qcom,rpmh-regulator.h

--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project

\
 
 \ /
  Last update: 2018-03-17 02:10    [W:0.188 / U:29.848 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site