Messages in this thread | | | Date | Thu, 15 Mar 2018 16:39:18 +0100 | Subject | Re: [PATCH v2 1/2] mtd: rawnand: gpmi: add support for specific ECC strength | From | Stefan Agner <> |
| |
On March 15, 2018 4:36:20 PM GMT+01:00, Boris Brezillon <boris.brezillon@bootlin.com> wrote: >Hi, > >On Sun, 4 Mar 2018 21:06:01 +0100 >Stefan Agner <stefan@agner.ch> wrote: > >> Add support for specified ECC strength/size using device tree >> properties nand-ecc-strength/nand-ecc-step-size. > >Han, we didn't hear back from you on that. Are you okay with adding >these new properties? IIRC, you feared there would be a delta between >u-boot and linux support. > >Stephan, there's no changelog. Has anything changed in this version or >is this just a RESEND?
Sorry forgot that. I just split documentation and driver changes.
-- Stefan
> >Regards, > >Boris > >> >> Signed-off-by: Stefan Agner <stefan@agner.ch> >> --- >> drivers/mtd/nand/gpmi-nand/gpmi-nand.c | 30 >++++++++++++++++++++---------- >> 1 file changed, 20 insertions(+), 10 deletions(-) >> >> diff --git a/drivers/mtd/nand/gpmi-nand/gpmi-nand.c >b/drivers/mtd/nand/gpmi-nand/gpmi-nand.c >> index 61fdd733492f..d04754289c03 100644 >> --- a/drivers/mtd/nand/gpmi-nand/gpmi-nand.c >> +++ b/drivers/mtd/nand/gpmi-nand/gpmi-nand.c >> @@ -198,17 +198,16 @@ static inline bool gpmi_check_ecc(struct >gpmi_nand_data *this) >> * >> * We may have available oob space in this case. >> */ >> -static int set_geometry_by_ecc_info(struct gpmi_nand_data *this) >> +static int set_geometry_by_ecc_info(struct gpmi_nand_data *this, >> + unsigned int ecc_strength, >> + unsigned int ecc_step) >> { >> struct bch_geometry *geo = &this->bch_geometry; >> struct nand_chip *chip = &this->nand; >> struct mtd_info *mtd = nand_to_mtd(chip); >> unsigned int block_mark_bit_offset; >> >> - if (!(chip->ecc_strength_ds > 0 && chip->ecc_step_ds > 0)) >> - return -EINVAL; >> - >> - switch (chip->ecc_step_ds) { >> + switch (ecc_step) { >> case SZ_512: >> geo->gf_len = 13; >> break; >> @@ -221,8 +220,8 @@ static int set_geometry_by_ecc_info(struct >gpmi_nand_data *this) >> chip->ecc_strength_ds, chip->ecc_step_ds); >> return -EINVAL; >> } >> - geo->ecc_chunk_size = chip->ecc_step_ds; >> - geo->ecc_strength = round_up(chip->ecc_strength_ds, 2); >> + geo->ecc_chunk_size = ecc_step; >> + geo->ecc_strength = round_up(ecc_strength, 2); >> if (!gpmi_check_ecc(this)) >> return -EINVAL; >> >> @@ -230,7 +229,7 @@ static int set_geometry_by_ecc_info(struct >gpmi_nand_data *this) >> if (geo->ecc_chunk_size < mtd->oobsize) { >> dev_err(this->dev, >> "unsupported nand chip. ecc size: %d, oob size : %d\n", >> - chip->ecc_step_ds, mtd->oobsize); >> + ecc_step, mtd->oobsize); >> return -EINVAL; >> } >> >> @@ -423,9 +422,20 @@ static int legacy_set_geometry(struct >gpmi_nand_data *this) >> >> int common_nfc_set_geometry(struct gpmi_nand_data *this) >> { >> + struct nand_chip *chip = &this->nand; >> + >> + if (chip->ecc.strength > 0 && chip->ecc.size > 0) >> + return set_geometry_by_ecc_info(this, chip->ecc.strength, >> + chip->ecc.size); >> + >> if ((of_property_read_bool(this->dev->of_node, >"fsl,use-minimum-ecc")) >> - || legacy_set_geometry(this)) >> - return set_geometry_by_ecc_info(this); >> + || legacy_set_geometry(this)) { >> + if (!(chip->ecc_strength_ds > 0 && chip->ecc_step_ds > 0)) >> + return -EINVAL; >> + >> + return set_geometry_by_ecc_info(this, chip->ecc_strength_ds, >> + chip->ecc_step_ds); >> + } >> >> return 0; >> }
-- Sent from my Android device with K-9 Mail. Please excuse my brevity.
| |