lkml.org 
[lkml]   [2018]   [Mar]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 4.15 143/146] scsi: qla2xxx: Fix memory leak in dual/target mode
Date
4.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: himanshu.madhani@cavium.com <himanshu.madhani@cavium.com>

commit 7867b98dceb7741065c9c1b645136facad5c2e93 upstream.

When driver is loaded in Target/Dual mode, it creates QPair to support
MQ and allocates resources for each QPair. This Qpair initialization is
delayed until the FW personality is changed to Dual/Target mode by
issuing chip reset. At the time of chip reset firmware is re-initilized
in correct personality all the QPairs are initialized by sending
MBC_INITIALIZE_MULTIQ (001Fh).

This patch fixes memory leak by adding check to issue
MBC_INITIALIZE_MULTIQ command only while deleting rsp/req queue when the
flag is set for initiator mode, and clean up QPair resources correctly
during the driver unload. This MBX does not need to be issued for
Target/Dual mode because chip reset will reset ISP.

Fixes: d65237c7f0860 ("scsi: qla2xxx: Fix mailbox failure while deleting Queue pairs")
Cc: <stable@vger.kernel.org> # 4.10+
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
drivers/scsi/qla2xxx/qla_init.c | 4 +---
drivers/scsi/qla2xxx/qla_mid.c | 18 ++++++++++--------
2 files changed, 11 insertions(+), 11 deletions(-)

--- a/drivers/scsi/qla2xxx/qla_init.c
+++ b/drivers/scsi/qla2xxx/qla_init.c
@@ -8221,9 +8221,6 @@ int qla2xxx_delete_qpair(struct scsi_qla
int ret = QLA_FUNCTION_FAILED;
struct qla_hw_data *ha = qpair->hw;

- if (!vha->flags.qpairs_req_created && !vha->flags.qpairs_rsp_created)
- goto fail;
-
qpair->delete_in_progress = 1;
while (atomic_read(&qpair->ref_count))
msleep(500);
@@ -8231,6 +8228,7 @@ int qla2xxx_delete_qpair(struct scsi_qla
ret = qla25xx_delete_req_que(vha, qpair->req);
if (ret != QLA_SUCCESS)
goto fail;
+
ret = qla25xx_delete_rsp_que(vha, qpair->rsp);
if (ret != QLA_SUCCESS)
goto fail;
--- a/drivers/scsi/qla2xxx/qla_mid.c
+++ b/drivers/scsi/qla2xxx/qla_mid.c
@@ -575,14 +575,15 @@ qla25xx_free_rsp_que(struct scsi_qla_hos
int
qla25xx_delete_req_que(struct scsi_qla_host *vha, struct req_que *req)
{
- int ret = -1;
+ int ret = QLA_SUCCESS;

- if (req) {
+ if (req && vha->flags.qpairs_req_created) {
req->options |= BIT_0;
ret = qla25xx_init_req_que(vha, req);
+ if (ret != QLA_SUCCESS)
+ return QLA_FUNCTION_FAILED;
}
- if (ret == QLA_SUCCESS)
- qla25xx_free_req_que(vha, req);
+ qla25xx_free_req_que(vha, req);

return ret;
}
@@ -590,14 +591,15 @@ qla25xx_delete_req_que(struct scsi_qla_h
int
qla25xx_delete_rsp_que(struct scsi_qla_host *vha, struct rsp_que *rsp)
{
- int ret = -1;
+ int ret = QLA_SUCCESS;

- if (rsp) {
+ if (rsp && vha->flags.qpairs_rsp_created) {
rsp->options |= BIT_0;
ret = qla25xx_init_rsp_que(vha, rsp);
+ if (ret != QLA_SUCCESS)
+ return QLA_FUNCTION_FAILED;
}
- if (ret == QLA_SUCCESS)
- qla25xx_free_rsp_que(vha, rsp);
+ qla25xx_free_rsp_que(vha, rsp);

return ret;
}

\
 
 \ /
  Last update: 2018-03-13 16:34    [W:0.327 / U:1.804 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site