lkml.org 
[lkml]   [2018]   [Mar]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 3/3] staging:iio:ad2s1210: Add write_raw to handle frequency
On 03/13, Dan Carpenter wrote:
> On Mon, Mar 12, 2018 at 03:21:52PM -0300, Rodrigo Siqueira wrote:
> > The write interface of AD2S1210 utilizes IIO_DEVICE_ATTR, which violate
> > the official IIO ABI. This patch, add the write_raw function responsible
> > for handling the fclkin and fexcit channel; also it removes the use of
> > IIO_DEVICE_ATTR for fclkin and fexcit.
> >
> > Signed-off-by: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com>
> > ---
> > drivers/staging/iio/resolver/ad2s1210.c | 117 +++++++++++++++-----------------
> > 1 file changed, 55 insertions(+), 62 deletions(-)
> >
> > diff --git a/drivers/staging/iio/resolver/ad2s1210.c b/drivers/staging/iio/resolver/ad2s1210.c
> > index 27a42ed10fcd..ea6ade4e563c 100644
> > --- a/drivers/staging/iio/resolver/ad2s1210.c
> > +++ b/drivers/staging/iio/resolver/ad2s1210.c
> > @@ -60,6 +60,8 @@
> >
> > #define AD2S1210_DEF_EXCIT 10000
> >
> > +#define ERROR_MESSAGE "ad2s1210: %s out of range\n"
> > +
>
> Don't make this a define. That's horrible. It's a pointless layer of
> abstraction.
>
>
> > enum ad2s1210_mode {
> > MOD_POS = 0,
> > MOD_VEL,
> > @@ -210,64 +212,6 @@ static inline int ad2s1210_soft_reset(struct ad2s1210_state *st)
> > return ad2s1210_config_write(st, 0x0);
> > }
> >
> > -static ssize_t ad2s1210_store_fclkin(struct device *dev,
> > - struct device_attribute *attr,
> > - const char *buf,
> > - size_t len)
> > -{
> > - struct ad2s1210_state *st = iio_priv(dev_to_iio_dev(dev));
> > - unsigned int fclkin;
> > - int ret;
> > -
> > - ret = kstrtouint(buf, 10, &fclkin);
> > - if (ret)
> > - return ret;
> > - if (fclkin < AD2S1210_MIN_CLKIN || fclkin > AD2S1210_MAX_CLKIN) {
> > - dev_err(dev, "ad2s1210: fclkin out of range\n");
> > - return -EINVAL;
> > - }
> > -
> > - mutex_lock(&st->lock);
> > - st->fclkin = fclkin;
> > -
> > - ret = ad2s1210_update_frequency_control_word(st);
> > - if (ret < 0)
> > - goto error_ret;
> > - ret = ad2s1210_soft_reset(st);
> > -error_ret:
> > - mutex_unlock(&st->lock);
> > -
> > - return ret < 0 ? ret : len;
> > -}
> > -
> > -static ssize_t ad2s1210_store_fexcit(struct device *dev,
> > - struct device_attribute *attr,
> > - const char *buf, size_t len)
> > -{
> > - struct ad2s1210_state *st = iio_priv(dev_to_iio_dev(dev));
> > - unsigned int fexcit;
> > - int ret;
> > -
> > - ret = kstrtouint(buf, 10, &fexcit);
> > - if (ret < 0)
> > - return ret;
> > - if (fexcit < AD2S1210_MIN_EXCIT || fexcit > AD2S1210_MAX_EXCIT) {
> > - dev_err(dev,
> > - "ad2s1210: excitation frequency out of range\n");
> > - return -EINVAL;
> > - }
> > - mutex_lock(&st->lock);
> > - st->fexcit = fexcit;
> > - ret = ad2s1210_update_frequency_control_word(st);
> > - if (ret < 0)
> > - goto error_ret;
> > - ret = ad2s1210_soft_reset(st);
> > -error_ret:
> > - mutex_unlock(&st->lock);
> > -
> > - return ret < 0 ? ret : len;
> > -}
> > -
> > static ssize_t ad2s1210_show_control(struct device *dev,
> > struct device_attribute *attr,
> > char *buf)
> > @@ -545,8 +489,58 @@ static int ad2s1210_read_raw(struct iio_dev *indio_dev,
> > return ret;
> > }
> >
> > -static IIO_DEVICE_ATTR(fclkin, 0644, NULL, ad2s1210_store_fclkin, 0);
> > -static IIO_DEVICE_ATTR(fexcit, 0644, NULL, ad2s1210_store_fexcit, 0);
> > +static int ad2s1210_write_raw(struct iio_dev *indio_dev,
> > + struct iio_chan_spec const *chan, int val,
> > + int val2, long mask)
> > +{
> > + struct ad2s1210_state *st = iio_priv(indio_dev);
> > + unsigned int clk = val;
> > + int ret;
> > +
> > + switch (mask) {
> > + case IIO_CHAN_INFO_FREQUENCY:
> > + switch (chan->channel) {
>
> This is a switch statement with only one case. Make it an if statement
> and chop out some indenting.
>
> if (mask != IIO_CHAN_INFO_FREQUENCY)
> return -EINVAL;
>
> > + case FCLKIN:
> > + if (clk < AD2S1210_MIN_CLKIN ||
> > + clk > AD2S1210_MAX_CLKIN) {
> > + dev_err(&indio_dev->dev, ERROR_MESSAGE,

Hi Dan,

Just a note, I did it because I will add more things to this function.
However, I agree with you, and I will follow your recommendation for
keep things simple and focused on the present.

> Ah... I see why you did the ERROR_MESSAGE define, to get around the 80
> character limit. Don't do that. Just go over 80 characters if you need
> to.
>
>
> > + "fclkin");
> > + ret = -EINVAL;
> > + goto error_ret;
>
> Direct returns are better. Less chance of bugs statistically.

I totally get your point here, and I will fix it. However, just for
curiosity, why goto in this situation has more chance to generate bugs
statically?

I will send a v2 with your recommendantions.
Thanks for the review and feedbacks :)

> regards,
> dan carpenter
>

\
 
 \ /
  Last update: 2018-03-13 14:07    [W:0.054 / U:4.920 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site