lkml.org 
[lkml]   [2018]   [Mar]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] arm64: dts: qcom: rename qcom,pcie devices to pcie
Date
The node name for a PCIe host bridge must be "pcie" as required by
the binging. dtc now warns about it:

arch/arm64/boot/dts/qcom/apq8096-db820c.dtb: Warning (pci_bridge): /soc/agnoc@0/qcom,pcie@610000: node name is not "pci" or "pcie"
arch/arm64/boot/dts/qcom/apq8096-db820c.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge'
arch/arm64/boot/dts/qcom/msm8996-mtp.dtb: Warning (pci_bridge): /soc/agnoc@0/qcom,pcie@610000: node name is not "pci" or "pcie"
arch/arm64/boot/dts/qcom/msm8996-mtp.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge'

This renames the nodes as appropriate.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi | 6 +++---
arch/arm64/boot/dts/qcom/msm8996.dtsi | 6 +++---
2 files changed, 6 insertions(+), 6 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi b/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi
index 1c8f1b86472d..e82f821a4e0e 100644
--- a/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi
+++ b/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi
@@ -140,16 +140,16 @@
};

agnoc@0 {
- qcom,pcie@600000 {
+ pcie@600000 {
perst-gpio = <&msmgpio 35 GPIO_ACTIVE_LOW>;
};

- qcom,pcie@608000 {
+ pcie@608000 {
status = "okay";
perst-gpio = <&msmgpio 130 GPIO_ACTIVE_LOW>;
};

- qcom,pcie@610000 {
+ pcie@610000 {
status = "okay";
perst-gpio = <&msmgpio 114 GPIO_ACTIVE_LOW>;
};
diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi
index 410ae787ebb4..cd08c8c5248e 100644
--- a/arch/arm64/boot/dts/qcom/msm8996.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi
@@ -851,7 +851,7 @@
#size-cells = <1>;
ranges;

- pcie0: qcom,pcie@600000 {
+ pcie0: pcie@600000 {
compatible = "qcom,pcie-msm8996", "snps,dw-pcie";
status = "disabled";
power-domains = <&gcc PCIE0_GDSC>;
@@ -904,7 +904,7 @@

};

- pcie1: qcom,pcie@608000 {
+ pcie1: pcie@608000 {
compatible = "qcom,pcie-msm8996", "snps,dw-pcie";
power-domains = <&gcc PCIE1_GDSC>;
bus-range = <0x00 0xff>;
@@ -957,7 +957,7 @@
"bus_slave";
};

- pcie2: qcom,pcie@610000 {
+ pcie2: pcie@610000 {
compatible = "qcom,pcie-msm8996", "snps,dw-pcie";
power-domains = <&gcc PCIE2_GDSC>;
bus-range = <0x00 0xff>;
--
2.9.0
\
 
 \ /
  Last update: 2018-03-13 13:16    [W:0.043 / U:2.536 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site