lkml.org 
[lkml]   [2018]   [Mar]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: [PATCH 5/5] arm64: allwinner: a64: Add support for TERES I laptop
Hi,

On Mon, Mar 12, 2018 at 04:10:50PM +0000, Harald Geyer wrote:
> The TERES I is an open hardware laptop built by Olimex using the
> Allwinner A64 SoC.
>
> Add the board specific .dts file, which includes the A64 .dtsi and
> enables the peripherals that we support so far.
>
> Signed-off-by: Harald Geyer <harald@ccbib.org>
> ---
> arch/arm64/boot/dts/allwinner/Makefile | 1 +
> .../boot/dts/allwinner/sun50i-a64-teres-i.dts | 308 +++++++++++++++++++++
> 2 files changed, 309 insertions(+)
> create mode 100644 arch/arm64/boot/dts/allwinner/sun50i-a64-teres-i.dts
>
> diff --git a/arch/arm64/boot/dts/allwinner/Makefile b/arch/arm64/boot/dts/allwinner/Makefile
> index f505227b0250..5f073f7423b7 100644
> --- a/arch/arm64/boot/dts/allwinner/Makefile
> +++ b/arch/arm64/boot/dts/allwinner/Makefile
> @@ -5,6 +5,7 @@ dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-olinuxino.dtb
> dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-orangepi-win.dtb
> dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-pine64-plus.dtb sun50i-a64-pine64.dtb
> dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-sopine-baseboard.dtb
> +dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-teres-i.dtb
> dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-orangepi-pc2.dtb
> dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-orangepi-prime.dtb
> dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-orangepi-zero-plus2.dtb
> diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-teres-i.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-teres-i.dts
> new file mode 100644
> index 000000000000..0d42b5111f0f
> --- /dev/null
> +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-teres-i.dts
> @@ -0,0 +1,308 @@
> +/*
> + * Copyright (C) Harald Geyer <harald@ccbib.org>
> + * based on sun50i-a64-olinuxino.dts by Jagan Teki <jteki@openedev.com>
> + *
> + * This file is dual-licensed: you can use it either under the terms
> + * of the GPL or the X11 license, at your option. Note that this dual
> + * licensing only applies to this file, and not this project as a
> + * whole.
> + *
> + * a) This library is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation; either version 2 of the
> + * License, or (at your option) any later version.
> + *
> + * This library is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * Or, alternatively,
> + *
> + * b) Permission is hereby granted, free of charge, to any person
> + * obtaining a copy of this software and associated documentation
> + * files (the "Software"), to deal in the Software without
> + * restriction, including without limitation the rights to use,
> + * copy, modify, merge, publish, distribute, sublicense, and/or
> + * sell copies of the Software, and to permit persons to whom the
> + * Software is furnished to do so, subject to the following
> + * conditions:
> + *
> + * The above copyright notice and this permission notice shall be
> + * included in all copies or substantial portions of the Software.
> + *
> + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
> + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
> + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
> + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
> + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
> + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
> + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
> + * OTHER DEALINGS IN THE SOFTWARE.
> + */
you should use an SPDX header here to define the license

> +
> +/dts-v1/;
> +
> +#include "sun50i-a64.dtsi"
> +
> +#include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/input/input.h>
> +#include <dt-bindings/pwm/pwm.h>
> +
> +/ {
> + model = "Olimex Teres I A64";

It's called the Teres-I, there's no need for the A64 here

> + compatible = "olimex,a64-teres-i", "allwinner,sun50i-a64";

Or in the compatible

> +
> + aliases {
> + serial0 = &uart0;
> + };
> +
> + backlight: backlight {
> + compatible = "pwm-backlight";
> + pwms = <&pwm 0 50000 0>;
> + brightness-levels = <0 10 20 30 40 50 60 70 100>;
> + default-brightness-level = <3>;
> + enable-gpios = <&pio 3 23 GPIO_ACTIVE_HIGH>; /* PD23 */
> + };
> +
> + chosen {
> + stdout-path = "serial0:115200n8";
> +
> + framebuffer-lcd {
> + eDP25-supply = <&reg_dldo2>;
> + eDP12-supply = <&reg_dldo3>;
> + };
> + };
> +
> + gpio-keys {
> + compatible = "gpio-keys";
> +
> + lid-switch {
> + label = "Lid Switch";
> + gpios = <&r_pio 0 8 GPIO_ACTIVE_LOW>; /* PL8 */
> + linux,input-type = <EV_SW>;
> + linux,code = <SW_LID>;
> + };
> + };
> +
> + leds: leds {

Do you need a label?

> + compatible = "gpio-leds";
> +
> + led_capslock: capslock {

Same thing here

> + gpios = <&pio 2 7 GPIO_ACTIVE_HIGH>; /* PC7 */

Ideally you should have LED labels here, following the scheme
devicename:colour:function

> + };
> +
> + led_numlock: numlock {
> + gpios = <&pio 2 4 GPIO_ACTIVE_HIGH>; /* PC4 */
> + };
> + };
> +
> + reg_usb1_vbus: usb1-vbus {
> + compatible = "regulator-fixed";
> + regulator-name = "usb1-vbus";
> + regulator-min-microvolt = <5000000>;
> + regulator-max-microvolt = <5000000>;
> + enable-active-high;
> + gpio = <&r_pio 0 7 GPIO_ACTIVE_HIGH>; /* PL7 */
> + status = "okay";

I guess this one has a parent regulator too?

> + };
> +
> + wifi_pwrseq: wifi_pwrseq {
> + compatible = "mmc-pwrseq-simple";
> + reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 */
> + };
> +};
> +
> +&ehci1 {
> + status = "okay";
> +};
> +
> +&i2c0 {
> + clock-frequency = <100000>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&i2c0_pins>;
> + status = "okay";
> +};

What is this used for?

Looks good otherwise, thanks!
Maxime

--
Maxime Ripard, Bootlin (formerly Free Electrons)
Embedded Linux and Kernel engineering
https://bootlin.com
[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2018-03-13 09:42    [W:0.197 / U:9.208 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site