lkml.org 
[lkml]   [2018]   [Mar]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [RESEND PATCH v5 2/5] dt-bindings: pwm-backlight: add PWM delay proprieties.
FAO Thierry,

> oh, devicetree mailing list is not added, sorry, so cc'ing ...
>
> 2018-02-19 12:11 GMT+01:00 Daniel Thompson <daniel.thompson@linaro.org>:
> > On Fri, Feb 16, 2018 at 06:40:31PM +0100, Enric Balletbo i Serra wrote:
> >> Hardware needs a delay between setting an initial (non-zero) PWM and
> >> enabling the backlight using GPIO. The post-pwm-on-delay-ms specifies
> >> this delay in milli seconds. Hardware also needs a delay between disabing
> >> the backlight using GPIO and setting PWM value to 0. The pwm-off-delay-ms
> >> is this delay in milli seconds.
> >>
> >> Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
> >> Acked-by: Pavel Machek <pavel@ucw.cz>
> >
> > Acked-by: Daniel Thompson <daniel.thompson@linaro.org>
> >
>
> Lee, I guess that after Daniel ack the only ack missing here is one
> from Rob Herring?

I'd also like an ACK from the PWM Maintainer if possible.

> Rob, if you have a chance to look at this I'd appreciate.

--
Lee Jones [李琼斯]
Linaro Services Technical Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog

\
 
 \ /
  Last update: 2018-03-12 10:12    [W:0.047 / U:1.336 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site