lkml.org 
[lkml]   [2018]   [Mar]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v2 1/2] dt-bindings: stm32: Add bindings for Extended TrustZone Protection
2018-03-01 15:03 GMT+01:00 Mark Rutland <mark.rutland@arm.com>:
> On Thu, Mar 01, 2018 at 02:58:05PM +0100, Benjamin Gaignard wrote:
>> Extended TrustZone Protection driver is very basic and only needs
>> to know where are the registers (no clock, no interrupt)
>>
>> Signed-off-by: Benjamin Gaignard <benjamin.gaignard@st.com>
>> ---
>> .../bindings/arm/stm32/st,stm32mp1-etzpc.txt | 25 ++++++++++++++++++++++
>> 1 file changed, 25 insertions(+)
>> create mode 100644 Documentation/devicetree/bindings/arm/stm32/st,stm32mp1-etzpc.txt
>>
>> diff --git a/Documentation/devicetree/bindings/arm/stm32/st,stm32mp1-etzpc.txt b/Documentation/devicetree/bindings/arm/stm32/st,stm32mp1-etzpc.txt
>> new file mode 100644
>> index 000000000000..9407e37f7d15
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/arm/stm32/st,stm32mp1-etzpc.txt
>> @@ -0,0 +1,25 @@
>> +STMicroelectronics STM32 Extended TrustZone Protection driver
>> +
>> +Required properties:
>> + - compatible : value should be "st,stm32mp1-etzpc"
>> + - reg : physical base address of the IP registers and length of memory
>> + mapped region.
>> + - protected-devices: list of phandle of devices protected by etzpc.
>> + Because etzpc driver rely on the phandle index in
>> + the list, holes must be filled with a disabled node.
>
> ... where the index corresponds to what, exactly?

to the offset of the status bits in the register

>
> Padding with a disabled node seems very hacky.

If a device node doesn't exist in the DT I need to fill the hole by something
to keep the index valid.

>
> Thanks,
> Mark.
>
>> +
>> +Example for stm32mp1:
>> +
>> +reserved: disabled_node {
>> + status = "disabled";
>> +};
>> +
>> +etzpc: etzpc@5c007000 {
>> + compatible = "st,stm32mp1-etzpc";
>> + reg = <0x5c007000 0x400>;
>> + protected-devices = <&usart1>,
>> + <&spi6>,
>> + <&i2c4>,
>> + <&reserved>,
>> + <&rng1>;
>> +};
>> --
>> 2.15.0
>>

\
 
 \ /
  Last update: 2018-03-01 15:09    [W:0.040 / U:0.684 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site