lkml.org 
[lkml]   [2018]   [Mar]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v4 1/2] dt-bindings: usb: ehci: add optional external vbus supply property
Date
On some boards, especially when vbus supply requires large current,
and the charge pump on the PHY isn't enough, an external vbus power switch
per port may be used.
Add portN_vbus-supply property to usb-ehci bindings. As the number of ports
depends on the ehci controller, and the port on which an external vbus
supply depends on the platform, <portN> is used to make it generic.

Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com>
---
Documentation/devicetree/bindings/usb/usb-ehci.txt | 1 +
1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/usb/usb-ehci.txt b/Documentation/devicetree/bindings/usb/usb-ehci.txt
index 3efde12..cd576db 100644
--- a/Documentation/devicetree/bindings/usb/usb-ehci.txt
+++ b/Documentation/devicetree/bindings/usb/usb-ehci.txt
@@ -19,6 +19,7 @@ Optional properties:
- phys : phandle + phy specifier pair
- phy-names : "usb"
- resets : phandle + reset specifier pair
+ - portN_vbus-supply : phandle of regulator supplying vbus for port N

Example (Sequoia 440EPx):
ehci@e0000300 {
--
2.7.4
\
 
 \ /
  Last update: 2018-03-01 10:54    [W:0.053 / U:0.016 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site