[lkml]   [2018]   [Feb]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
Patch in this message
Subject[PATCH net-queue 2/3] e1000e: Fix queue interrupt re-raising in Other interrupt.
restores the ICS write for rx/tx queue interrupts which was present before
commit 16ecba59bc33 ("e1000e: Do not read ICR in Other interrupt",
v4.5-rc1) but was not restored in commit 4aea7a5c5e94 ("e1000e: Avoid
receiver overrun interrupt bursts", v4.15-rc1).

This re-raises the queue interrupts in case the txq or rxq bits were set in
ICR and the Other interrupt handler read and cleared ICR before the queue
interrupt was raised.

Fixes: 4aea7a5c5e94 ("e1000e: Avoid receiver overrun interrupt bursts")
Signed-off-by: Benjamin Poirier <>
drivers/net/ethernet/intel/e1000e/netdev.c | 3 +++
1 file changed, 3 insertions(+)

diff --git a/drivers/net/ethernet/intel/e1000e/netdev.c b/drivers/net/ethernet/intel/e1000e/netdev.c
index 3b36efa6228d..2c9609bee2ae 100644
--- a/drivers/net/ethernet/intel/e1000e/netdev.c
+++ b/drivers/net/ethernet/intel/e1000e/netdev.c
@@ -1919,6 +1919,9 @@ static irqreturn_t e1000_msix_other(int __always_unused irq, void *data)
icr = er32(ICR);
ew32(ICR, E1000_ICR_OTHER);

+ if (icr & adapter->eiac_mask)
+ ew32(ICS, (icr & adapter->eiac_mask));
if (icr & E1000_ICR_LSC) {
ew32(ICR, E1000_ICR_LSC);
hw->mac.get_link_status = true;
 \ /
  Last update: 2018-02-08 07:49    [W:0.079 / U:3.236 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site