lkml.org 
[lkml]   [2018]   [Feb]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v2 15/15] ARM: dts: dra7: Add high speed modes capability to MMC1/MMC2 dt node
From
Date
Kishon,

On Tuesday 06 February 2018 06:28 PM, Kishon Vijay Abraham I wrote:
> Add UHS/HS200/DDR speed mode capability to MMC1 and MMC2 dt nodes.
>
> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>

Along with this, dont we need to have

/delete-property/ mmc-hs200-1_8v;

for eMMC on Beagle x15 which does not support HS200?

Or are you planning to depend on lack of pinctrl entries for HS200 to
take care of that?

Thanks,
Sekhar


> ---
> arch/arm/boot/dts/dra7.dtsi | 10 ++++++++++
> 1 file changed, 10 insertions(+)
>
> diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi
> index 7bf33d522b14..feb496e7c5ef 100644
> --- a/arch/arm/boot/dts/dra7.dtsi
> +++ b/arch/arm/boot/dts/dra7.dtsi
> @@ -1073,7 +1073,13 @@
> status = "disabled";
> pbias-supply = <&pbias_mmc_reg>;
> max-frequency = <192000000>;
> + sd-uhs-sdr104;
> + sd-uhs-sdr50;
> + sd-uhs-ddr50;
> + sd-uhs-sdr25;
> + sd-uhs-sdr12;
> cap-sd-highspeed;
> + mmc-ddr-1_8v;
> cap-mmc-highspeed;
> };
>
> @@ -1092,6 +1098,10 @@
> status = "disabled";
> max-frequency = <192000000>;
> cap-sd-highspeed;
> + sd-uhs-sdr25;
> + sd-uhs-sdr12;
> + mmc-hs200-1_8v;
> + mmc-ddr-1_8v;
> cap-mmc-highspeed;
> };
>
> --
> 2.11.0
>

\
 
 \ /
  Last update: 2018-02-07 10:13    [W:0.083 / U:2.232 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site