[lkml]   [2018]   [Feb]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
Subject[PATCH v4 00/12] drm/sun4i: Add A83T HDMI support
This patch series implements support for A83T DW HDMI and PHY. Contrary to
v1 series, this one is based on latest linux-next, since all needed patches
were merged.

While exactly this combination of HDMI controller and PHY is not common in
Allwinner SoCs, this patch series nevertheless makes groundwork for other
SoCs, which have same DW HDMI IP block, but different PHYs, like H3 and H5.

Please take a look.

Best regards,

Changes from v3:
- Collected tags
- drop patch for changing NKMP formula
- add patch to use 64 bit intermediate variable for calculating NKMP
clock rate and thus preventing overflow in some cases
- rework DT bindings patch according Rob's suggestions
- move TMDS clock from PHY to controller driver, since documentation
suggest such relationship

Changes from v2:
- Collected ACKs and Review-by tags
- patch for deinit callback was replaced with the one which gives control
of drvdata to driver
- fixed meson driver (renamed reset function)
- prototypes for newly exported functions in dw_hdmi.h were reordered

Changes from v1:
- Collected ACKs
- Separated bindings for controller and PHY
- Split driver into two parts - controller and PHY
- HDMI PHY driver now uses regmap for writes
- added defines for PHY registers and bits
- updated DT entries to accomodate new bindings
- removed already merged clock patch
- reworked first clock patch according to comments
- added new clock patch which changes NKMP formula
- split TCON patch in two, one for quirk and one for new compatible
- reworked patch which exports DW HDMI PHY functions:
- remove "gen2" from some function names
- removed parameter from dw_hdmi_phy_reset()
- added address parameter to dw_hdmi_phy_i2c_set_addr()
- updated most of commit messages

Jernej Skrabec (12):
clk: sunxi-ng: Mask nkmp factors when setting register
clk: sunxi-ng: Use u64 for calculation of nkmp rate
drm/bridge/synopsys: dw-hdmi: Enable workaround for v1.32a
drm/bridge/synopsys: dw-hdmi: Export some PHY related functions
drm/bridge/synopsys: dw-hdmi: don't clobber drvdata
dt-bindings: display: sun4i-drm: Add A83T HDMI pipeline
drm/sun4i: Add has_channel_0 TCON quirk
drm/sun4i: Add support for A83T second TCON
drm/sun4i: Add support for A83T second DE2 mixer
drm/sun4i: Implement A83T HDMI driver
ARM: dts: sun8i: a83t: Add HDMI display pipeline
ARM: dts: sun8i: a83t: Enable HDMI on BananaPi M3

.../bindings/display/sunxi/sun4i-drm.txt | 195 ++++++++++++++-
arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts | 25 ++
arch/arm/boot/dts/sun8i-a83t.dtsi | 119 ++++++++-
drivers/clk/sunxi-ng/ccu_nkmp.c | 42 +++-
drivers/gpu/drm/bridge/synopsys/dw-hdmi.c | 83 ++++---
drivers/gpu/drm/imx/dw_hdmi-imx.c | 13 +-
drivers/gpu/drm/meson/meson_dw_hdmi.c | 22 +-
drivers/gpu/drm/rcar-du/rcar_dw_hdmi.c | 12 +-
drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c | 13 +-
drivers/gpu/drm/sun4i/Kconfig | 9 +
drivers/gpu/drm/sun4i/Makefile | 4 +
drivers/gpu/drm/sun4i/sun4i_tcon.c | 46 +++-
drivers/gpu/drm/sun4i/sun4i_tcon.h | 1 +
drivers/gpu/drm/sun4i/sun8i_dw_hdmi.c | 196 +++++++++++++++
drivers/gpu/drm/sun4i/sun8i_dw_hdmi.h | 44 ++++
drivers/gpu/drm/sun4i/sun8i_hdmi_phy.c | 270 +++++++++++++++++++++
drivers/gpu/drm/sun4i/sun8i_mixer.c | 11 +
include/drm/bridge/dw_hdmi.h | 24 +-
18 files changed, 1040 insertions(+), 89 deletions(-)
create mode 100644 drivers/gpu/drm/sun4i/sun8i_dw_hdmi.c
create mode 100644 drivers/gpu/drm/sun4i/sun8i_dw_hdmi.h
create mode 100644 drivers/gpu/drm/sun4i/sun8i_hdmi_phy.c


 \ /
  Last update: 2018-02-07 22:26    [W:0.067 / U:0.316 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site