lkml.org 
[lkml]   [2018]   [Feb]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH 2/3] x86/tme: Detect if TME and MKTME is activated by BIOS
From
Date
On Wed, 2018-02-07 at 11:16 +0300, Kirill A. Shutemov wrote:
> On Wed, Feb 07, 2018 at 05:34:10PM +1300, Kai Huang wrote:
> > On Wed, 2018-01-31 at 12:15 +0300, Kirill A. Shutemov wrote:
> > > IA32_TME_ACTIVATE MSR (0x982) can be used to check if BIOS has
> > > enabled
> > > TME and MKTME. It includes which encryption policy/algorithm is
> > > selected
> > > for TME or available for MKTME. For MKTME, the MSR also
> > > enumerates
> > > how
> > > many KeyIDs are available.
> > >
> > > Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.co
> > > m>
> > > ---
> > > arch/x86/kernel/cpu/intel.c | 83
> > > +++++++++++++++++++++++++++++++++++++++++++++
> > > 1 file changed, 83 insertions(+)
> > >
> > > diff --git a/arch/x86/kernel/cpu/intel.c
> > > b/arch/x86/kernel/cpu/intel.c
> > > index 6936d14d4c77..5b95fa484837 100644
> > > --- a/arch/x86/kernel/cpu/intel.c
> > > +++ b/arch/x86/kernel/cpu/intel.c
> > > @@ -517,6 +517,86 @@ static void detect_vmx_virtcap(struct
> > > cpuinfo_x86 *c)
> > > }
> > > }
> > >
> > > +#define MSR_IA32_TME_ACTIVATE 0x982
> >
> > Should this MSR go into msr-index.h?
>
> No. Comment from msr-index.h:
>
> * Do not add new entries to this file unless the definitions are
> shared
> * between multiple compilation units.
>
> > > +
> > > +#define TME_ACTIVATE_LOCKED(x) (x & 0x1)
> > > +#define TME_ACTIVATE_ENABLED(x) (x & 0x2)
> > > +
> > > +#define TME_ACTIVATE_POLICY(x) ((x >> 4) & 0xf)
> > > /* Bits 7:4 */
> > > +#define TME_ACTIVATE_POLICY_AES_XTS 0
> > > +
> > > +#define TME_ACTIVATE_KEYID_BITS(x) ((x >> 32) & 0xf)
> > > /
> > > * Bits 35:32 */
> > > +
> > > +#define TME_ACTIVATE_CRYPTO_ALGS(x) ((x >> 48) & 0xffff)
> > > /* Bits 63:48 */
> > > +#define TME_ACTIVATE_CRYPTO_AES_XTS 1
> > > +
> > > +#define MKTME_ENABLED 0
> > > +#define MKTME_DISABLED 1
> > > +#define MKTME_UNINITIALIZED 2
> > > +static int mktme_status = MKTME_UNINITIALIZED;
> > > +
> > > +static void detect_tme(struct cpuinfo_x86 *c)
> > > +{
> > > + u64 tme_activate, tme_policy, tme_crypto_algs;
> > > + int keyid_bits = 0, nr_keyids = 0;
> > > + static u64 tme_activate_cpu0 = 0;
> > > +
> > > + rdmsrl(MSR_IA32_TME_ACTIVATE, tme_activate);
> > > +
> > > + if (mktme_status != MKTME_UNINITIALIZED) {
> > > + /* Broken BIOS? */
> > > + if (tme_activate != tme_activate_cpu0) {
> > > + pr_err_once("TME: configuation is
> > > inconsistent between CPUs\n");
> > > + mktme_status = MKTME_DISABLED;
> > > + }
> > > + goto out;
> >
> > Why goto out here? If something goes wrong, I think it is pointless
> > to
> > read keyID bits staff? IMHO if something goes wrong, you should set
> > mktme_status to disabled, and clear tme_activate_cpu0?
>
> We still have to mask out keyid bits from x86_phys_bits if CPU has
> TME
> enabled.

Reading spec again yes you are right.

> But yeah, as you pointed below, I need to check that it actually
> locked and enabled.
>
> > > + }
> > > +
> > > + tme_activate_cpu0 = tme_activate;
> > > +
> > > + if (!TME_ACTIVATE_LOCKED(tme_activate) ||
> > > !TME_ACTIVATE_ENABLED(tme_activate)) {
> > > + pr_info("TME: not enabled by BIOS\n");
> > > + mktme_status = MKTME_DISABLED;
> > > + goto out;
> >
> > I think it is pointless to read keyID bits staff if TME is not even
> > enabled.
> >
> > > + }
> > > +
> > > + pr_info("TME: enabled by BIOS\n");
> > > +
> > > + tme_policy = TME_ACTIVATE_POLICY(tme_activate);
> > > + if (tme_policy != TME_ACTIVATE_POLICY_AES_XTS)
> > > + pr_warn("TME: Unknown policy is active:
> > > %#llx\n",
> > > tme_policy);
> > > +
> > > + tme_crypto_algs =
> > > TME_ACTIVATE_CRYPTO_ALGS(tme_activate);
> > > + if (!(tme_crypto_algs & TME_ACTIVATE_CRYPTO_AES_XTS)) {
> > > + pr_err("MKTME: No known encryption algorithm is
> > > supported: %#llx\n",
> > > + tme_crypto_algs);
> > > + mktme_status = MKTME_DISABLED;
> > > + }
> >
> > To me it is a little bit confusing about the naming. tme_policy is
> > the
> > crypto_alg used by TME keyID (0), and tme_crypto_algs is bitmap of
> > supported crypto_algs for MK-TME. Probably a better naming is
> > needed?
> > And the naming of TME_ACTIVATE_POLICY(x),
> > TME_ACTIVATE_CRYPTO_ALGS(x)
> > above as well?
>
> Suggestions?

I would go with 'tme_cryto_alg', and 'mktme_supported_crypto_algs' for
the two variables, and TME_CRYPTO_ALG(x), TME_CRYPTO_ALG_AES_XTS_128,
MKTME_SUPPORTED_CRYPTO_ALGS(x), and MKTME_CRYPTO_ALG_AES_XTS_128 for
the macros, but it's up to you and other guys.

Btw I do think AES_XTS should be AES_XTS_128, even you go with current
names, as AES cipher can also take 256-bit key.

Thanks,
-Kai
>

\
 
 \ /
  Last update: 2018-02-07 12:01    [W:0.043 / U:0.104 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site