lkml.org 
[lkml]   [2018]   [Feb]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] Documentation: networking: Update ixgb kconfig select documentation
Date
Update documentation on how to enable ixgb and ixgb DCB.
Simply remove NETDEV_10000 and replace it with the new used kconfig names.

Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
---
Documentation/networking/ixgb.txt | 3 ++-
Documentation/networking/ixgbe.txt | 7 ++++---
2 files changed, 6 insertions(+), 4 deletions(-)

diff --git a/Documentation/networking/ixgb.txt b/Documentation/networking/ixgb.txt
index 09f71d71920a..b10f360c57d4 100644
--- a/Documentation/networking/ixgb.txt
+++ b/Documentation/networking/ixgb.txt
@@ -70,7 +70,8 @@ select m for "Intel(R) PRO/10GbE support" located at:
Location:
-> Device Drivers
-> Network device support (NETDEVICES [=y])
- -> Ethernet (10000 Mbit) (NETDEV_10000 [=y])
+ -> Ethernet driver support (ETHERNET [=y])
+ -> Intel devices (NET_VENDOR_INTEL [=y])
1. make modules && make modules_install

2. Load the module:
diff --git a/Documentation/networking/ixgbe.txt b/Documentation/networking/ixgbe.txt
index 687835415707..90a3860cca3d 100644
--- a/Documentation/networking/ixgbe.txt
+++ b/Documentation/networking/ixgbe.txt
@@ -253,9 +253,10 @@ Additional Configurations

-> Device Drivers
-> Network device support (NETDEVICES [=y])
- -> Ethernet (10000 Mbit) (NETDEV_10000 [=y])
- -> Intel(R) 10GbE PCI Express adapters support
- -> Data Center Bridging (DCB) Support
+ -> Ethernet driver (ETHERNET [=y])
+ -> Intel devices (NET_VENDOR_INTEL [=y])
+ -> Intel(R) 10GbE PCI Express adapters support (IXGBE [=y])
+ -> Data Center Bridging (DCB) Support (IXGBE_DCB [=y])

After these options are selected, you must rebuild your kernel and your
modules.
--
2.13.6
\
 
 \ /
  Last update: 2018-02-06 21:43    [W:0.030 / U:2.304 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site