lkml.org 
[lkml]   [2018]   [Feb]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v3 1/7] drm/panel: simple: add support for Ampire AM-800480AYTZQW-00H
From
Date
Hi Jagan,

On Sun, 2018-02-04 at 23:19 +0530, Jagan Teki wrote:
> This adds support for the Ampire AM-800480AYTZQW-00H 7.0" WGA LCD,
> which can be supported by the simple panel driver.
>
> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
> Reviewed-by: Rob Herring <robh@kernel.org>
> ---
> Changes for v3:
> - collect Rob reiew tag
> Changes for v2:
> - Updated binding info about optional properties, node and example
>
> .../display/panel/ampire,am-800480aytzqw-00h.txt | 25 ++++++++++++++++++++
> drivers/gpu/drm/panel/panel-simple.c | 27 ++++++++++++++++++++++
> 2 files changed, 52 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/display/panel/ampire,am-800480aytzqw-00h.txt
>
> diff --git a/Documentation/devicetree/bindings/display/panel/ampire,am-800480aytzqw-00h.txt b/Documentation/devicetree/bindings/display/panel/ampire,am-800480aytzqw-00h.txt
> new file mode 100644
> index 0000000..abb5eee
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/display/panel/ampire,am-800480aytzqw-00h.txt
> @@ -0,0 +1,25 @@
> +Ampire AM-800480AYTZQW-00H 7.0" WVGA TFT LCD panel
> +
> +This binding is compatible with the simple-panel binding, which is specified
> +in simple-panel.txt in this directory.
> +
> +Required properties:
> +- compatible: should be "ampire,am-800480aytzqw-00h"
> +
> +Optional properties:
> +- backlight: phandle of the backlight device attached to the panel
> +
> +Optional nodes:
> +- Video port for LVDS panel input.
> +
> +Example:
> + panel {
> + compatible = "ampire,am-800480aytzqw-00h";
> + backlight = <&backlight_lvds>;
> +
> + port {
> + panel_in: endpoint {
> + remote-endpoint = <&lvds0_out>;
> + };
> + };
> + };
> diff --git a/drivers/gpu/drm/panel/panel-simple.c b/drivers/gpu/drm/panel/panel-simple.c
> index 5591984..2ecc14b 100644
> --- a/drivers/gpu/drm/panel/panel-simple.c
> +++ b/drivers/gpu/drm/panel/panel-simple.c
> @@ -412,6 +412,30 @@ static const struct panel_desc ampire_am_480272h3tmqw_t01h = {
> .bus_format = MEDIA_BUS_FMT_RGB888_1X24,
> };
>
> +static const struct display_timing ampire_am_800480aytzqw_00h_timing = {
> + .pixelclock = { 27700000, 29200000, 39600000 },
> + .hactive = { 800, 800, 800 },
> + .hfront_porch = { 12, 40, 212 },
> + .hback_porch = { 88, 88, 88 },
> + .hsync_len = { 1, 2, 40 },
> + .vactive = { 480, 480, 480 },
> + .vfront_porch = { 1, 13, 88 },
> + .vback_porch = { 32, 32, 32 },
> + .vsync_len = { 1, 2, 3 },
> + .flags = DISPLAY_FLAGS_DE_HIGH,
> +};
> +
> +static const struct panel_desc ampire_am_800480aytzqw_00h = {
> + .timings = &ampire_am_800480aytzqw_00h_timing,
> + .num_timings = 1,
> + .bpc = 6,
> + .size = {
> + .width = 154,
> + .height = 86,
> + },

If the panel datasheet specifies minimal prepare, enable, disable, and
unprepare delays, it would be good to add them to the panel descriptor.

> + .bus_format = MEDIA_BUS_FMT_RGB666_1X7X3_SPWG,
> +};
> +
> static const struct drm_display_mode ampire_am800480r3tmqwa1h_mode = {
> .clock = 33333,
> .hdisplay = 800,
> @@ -2028,6 +2052,9 @@ static const struct of_device_id platform_of_match[] = {
> .compatible = "ampire,am-480272h3tmqw-t01h",
> .data = &ampire_am_480272h3tmqw_t01h,
> }, {
> + .compatible = "ampire,am-800480aytzqw-00h",
> + .data = &ampire_am_800480aytzqw_00h,
> + }, {
> .compatible = "ampire,am800480r3tmqwa1h",
> .data = &ampire_am800480r3tmqwa1h,
> }, {

regards
Philipp

\
 
 \ /
  Last update: 2018-02-06 10:36    [W:0.120 / U:1.936 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site