lkml.org 
[lkml]   [2018]   [Feb]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v3 2/2] ASoC: ak5558: Add bindings for AK5558 ADC
On Mon, Feb 5, 2018 at 3:01 PM, Daniel Baluta <daniel.baluta@nxp.com> wrote:
> Document the bindings for AK5558 ADC.
>
> Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
> ---
> Documentation/devicetree/bindings/sound/ak5558.txt | 22 ++++++++++++++++++++++
> 1 file changed, 22 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/sound/ak5558.txt
>
> diff --git a/Documentation/devicetree/bindings/sound/ak5558.txt b/Documentation/devicetree/bindings/sound/ak5558.txt
> new file mode 100644
> index 0000000..7d67ca6
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/sound/ak5558.txt
> @@ -0,0 +1,22 @@
> +AK5558 8 channel differential 32-bit delta-sigma ADC
> +
> +This device supports I2C mode only.
> +
> +Required properties:
> +
> +- compatible : "asahi-kasei,ak5558"
> +- reg : The I2C address of the device.
> +
> +Optional properties:
> +
> +- reset-gpios: A GPIO specifier for the power down & reset pin.
> +
> +Example:
> +
> +&i2c {
> + ak5558: adc@10 {

If I understood well Rob's suggestion was to make it only:

adc@10 {

Other than that:

Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>

\
 
 \ /
  Last update: 2018-02-05 21:26    [W:0.072 / U:6.672 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site