lkml.org 
[lkml]   [2018]   [Feb]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v6 17/41] dt-bindings: clock: Add bindings for DA8XX CFGCHIP clocks
From
Date
On Friday 02 February 2018 11:20 PM, David Lechner wrote:
> On 02/02/2018 12:20 AM, Sekhar Nori wrote:
>> On Saturday 20 January 2018 10:43 PM, David Lechner wrote:
>>> +EMIFA clock source (ASYNC1)
>>> +---------------------------
>>> +Required properties:
>>> +- compatible: shall be "ti,da850-async1-clksrc".
>>> +- #clock-cells: from common clock binding; shall be set to 0.
>>> +- clocks: phandles to the parent clocks corresponding to clock-names
>>> +- clock-names: shall be "pll0_sysclk3", "div4.5"
>>
>> Is this clock really referred to as aysnc1 in documentation? I don't get
>> hits for async1 in OMAP-L138 TRM.
>>
>
> It looks like it is only called ASYNC1 in the datasheet, not the TRM.
>
> Table 6-5. Maximum Internal Clock Frequencies at Each Voltage Operating
> Point

I see it now. Its fine to use async1 then.

Thanks,
Sekhar

\
 
 \ /
  Last update: 2018-02-05 10:45    [W:0.077 / U:30.804 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site