lkml.org 
[lkml]   [2018]   [Feb]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v2 4/5] dt-bindings: clock: mediatek: update audsys documentation to adapt MFD device
From
Date
On Mon, 2018-02-05 at 00:08 -0600, Rob Herring wrote:
> On Wed, Jan 31, 2018 at 03:42:44PM +0800, Ryder Lee wrote:
> > As the MediaTek audio hardware block that expose functionalities that are
> > handled by separate subsystems in the kernel, and there are registers that
> > are shared between related drivers.
> >
> > Switch the current device to an MFD device, add more descriptions about the
> > subsystem and modify example accordingly.
> >
> > Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
> > ---
> > .../bindings/arm/mediatek/mediatek,audsys.txt | 37 ++++++++++++++++++----
> > 1 file changed, 30 insertions(+), 7 deletions(-)
> >
> > diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,audsys.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,audsys.txt
> > index 9b8f578..677af40 100644
> > --- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,audsys.txt
> > +++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,audsys.txt
> > @@ -1,22 +1,45 @@
> > -MediaTek AUDSYS controller
> > +MediaTek Audio Subsystem
> > ============================
> > +The audio subsystem is one of the multi-function blocks of MediaTek SoCs.
> > +It contains a system controller, which provides a number registers giving
> > +access to two features: AUDSYS clocks and Audio Front End (AFE) components.
> >
> > +For the top level node:
> > +- compatible: must be: "syscon", "simple-mfd";
>
> This should have some SoC specific compatible.

As we don't have a specific driver (compatible string) for it and if we
need to add that I think the term '*-audsys' is very suitable here, but
unfortunately, it has already picked for clock driver (see child node).

I also took ../../marvell/*-system-controller.txt as examples for my
case. Thus, I'm not sure should we still need a new one here?

> > +- reg: register area of the Audio Subsystem
> > +
> > +Required sub-nodes:
> > +
> > +AUDSYS clocks:
> > +-------
> > The MediaTek AUDSYS controller provides various clocks to the system.
> >
> > Required Properties:
> >
> > - compatible: Should be one of:
> > - - "mediatek,mt7622-audsys", "syscon"
> > + - "mediatek,mt2701-audsys";
> > + - "mediatek,mt7622-audsys";
> > - #clock-cells: Must be 1
> >
> > The AUDSYS controller uses the common clk binding from
> > Documentation/devicetree/bindings/clock/clock-bindings.txt
> > The available clocks are defined in dt-bindings/clock/mt*-clk.h.
>
> There's no register range associated with the clocks? If there is, add a
> reg property.

No, we don't need reg property here, as the two sub-drivers will obtain
the regmap which is propagated from the parent.

Thanks

> >
> > +AFE components:
> > +-------
> > +For common binding part and usage, refer to
> > +../sonud/mt2701-afe-pcm.txt.
> > +
> > Example:
> >
> > -audsys: audsys@11220000 {
> > - compatible = "mediatek,mt7622-audsys", "syscon";
> > - reg = <0 0x11220000 0 0x1000>;
> > - #clock-cells = <1>;
> > -};
> > + audio-subsystem@11220000 {
> > + compatible = "syscon", "simple-mfd";
> > + reg = <0 0x11220000 0 0x2000>;
> > +
> > + audsys: clock {
> > + compatible = "mediatek,mt2701-audsys";
> > + #clock-cells = <1>;
> > + };
> > +
> > + ...
> > + };
> > --
> > 1.9.1
> >
>
> _______________________________________________
> Linux-mediatek mailing list
> Linux-mediatek@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-mediatek


\
 
 \ /
  Last update: 2018-02-05 10:11    [W:0.068 / U:4.000 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site