lkml.org 
[lkml]   [2018]   [Feb]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH AUTOSEL for 4.9 01/52] dmaengine: fsl-edma: disable clks on all error paths
Date
From: Andreas Platschek <andreas.platschek@opentech.at>

[ Upstream commit 2610acf46b9ed528ec2cacd717bc9d354e452b73 ]

Previously enabled clks are only disabled if clk_prepare_enable() fails.
However, there are other error paths were the previously enabled
clocks are not disabled.

To fix the problem, fsl_disable_clocks() now takes the number of clocks
that shall be disabled + unprepared. For existing calls were all clocks
were already successfully prepared + enabled, DMAMUX_NR is passed to
disable + unprepare all clocks.

In error paths were only some clocks were successfully prepared +
enabled the loop counter is passed, in order to disable + unprepare
all successfully prepared + enabled clocks.

Found by Linux Driver Verification project (linuxtesting.org).

Signed-off-by: Andreas Platschek <andreas.platschek@opentech.at>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
drivers/dma/fsl-edma.c | 28 ++++++++++++++--------------
1 file changed, 14 insertions(+), 14 deletions(-)

diff --git a/drivers/dma/fsl-edma.c b/drivers/dma/fsl-edma.c
index 6775f2c74e25..c7568869284e 100644
--- a/drivers/dma/fsl-edma.c
+++ b/drivers/dma/fsl-edma.c
@@ -863,11 +863,11 @@ static void fsl_edma_irq_exit(
}
}

-static void fsl_disable_clocks(struct fsl_edma_engine *fsl_edma)
+static void fsl_disable_clocks(struct fsl_edma_engine *fsl_edma, int nr_clocks)
{
int i;

- for (i = 0; i < DMAMUX_NR; i++)
+ for (i = 0; i < nr_clocks; i++)
clk_disable_unprepare(fsl_edma->muxclk[i]);
}

@@ -904,25 +904,25 @@ static int fsl_edma_probe(struct platform_device *pdev)

res = platform_get_resource(pdev, IORESOURCE_MEM, 1 + i);
fsl_edma->muxbase[i] = devm_ioremap_resource(&pdev->dev, res);
- if (IS_ERR(fsl_edma->muxbase[i]))
+ if (IS_ERR(fsl_edma->muxbase[i])) {
+ /* on error: disable all previously enabled clks */
+ fsl_disable_clocks(fsl_edma, i);
return PTR_ERR(fsl_edma->muxbase[i]);
+ }

sprintf(clkname, "dmamux%d", i);
fsl_edma->muxclk[i] = devm_clk_get(&pdev->dev, clkname);
if (IS_ERR(fsl_edma->muxclk[i])) {
dev_err(&pdev->dev, "Missing DMAMUX block clock.\n");
+ /* on error: disable all previously enabled clks */
+ fsl_disable_clocks(fsl_edma, i);
return PTR_ERR(fsl_edma->muxclk[i]);
}

ret = clk_prepare_enable(fsl_edma->muxclk[i]);
- if (ret) {
- /* disable only clks which were enabled on error */
- for (; i >= 0; i--)
- clk_disable_unprepare(fsl_edma->muxclk[i]);
-
- dev_err(&pdev->dev, "DMAMUX clk block failed.\n");
- return ret;
- }
+ if (ret)
+ /* on error: disable all previously enabled clks */
+ fsl_disable_clocks(fsl_edma, i);

}

@@ -976,7 +976,7 @@ static int fsl_edma_probe(struct platform_device *pdev)
if (ret) {
dev_err(&pdev->dev,
"Can't register Freescale eDMA engine. (%d)\n", ret);
- fsl_disable_clocks(fsl_edma);
+ fsl_disable_clocks(fsl_edma, DMAMUX_NR);
return ret;
}

@@ -985,7 +985,7 @@ static int fsl_edma_probe(struct platform_device *pdev)
dev_err(&pdev->dev,
"Can't register Freescale eDMA of_dma. (%d)\n", ret);
dma_async_device_unregister(&fsl_edma->dma_dev);
- fsl_disable_clocks(fsl_edma);
+ fsl_disable_clocks(fsl_edma, DMAMUX_NR);
return ret;
}

@@ -1015,7 +1015,7 @@ static int fsl_edma_remove(struct platform_device *pdev)
fsl_edma_cleanup_vchan(&fsl_edma->dma_dev);
of_dma_controller_free(np);
dma_async_device_unregister(&fsl_edma->dma_dev);
- fsl_disable_clocks(fsl_edma);
+ fsl_disable_clocks(fsl_edma, DMAMUX_NR);

return 0;
}
--
2.11.0
\
 
 \ /
  Last update: 2018-02-03 19:30    [W:0.176 / U:1.960 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site