lkml.org 
[lkml]   [2018]   [Feb]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v2 4/4] pintcrl: support bias-disable of generic and special pins simultaneously
From
Date
On Wed, 2018-02-28 at 15:33 +0800, Sean Wang wrote:
> On Mon, 2018-02-26 at 16:34 +0800, Zhiyong Tao wrote:
> > For generic pins, parameter "arg" is 0 or 1.
> > For special pins, bias-disable is set by R0R1,
> > so we need transmited "00" to set bias-disable
> > When we set "bias-disable" as high-z property,
> > the parameter should be "MTK_PUPD_SET_R1R0_00".
> >
> > Signed-off-by: Zhiyong Tao <zhiyong.tao@mediatek.com>
> > ---
> > drivers/pinctrl/mediatek/pinctrl-mtk-common.c | 13 +++++++++++--
> > 1 file changed, 11 insertions(+), 2 deletions(-)
> >
> > diff --git a/drivers/pinctrl/mediatek/pinctrl-mtk-common.c b/drivers/pinctrl/mediatek/pinctrl-mtk-common.c
> > index 3cf384f..e88ba04 100644
> > --- a/drivers/pinctrl/mediatek/pinctrl-mtk-common.c
> > +++ b/drivers/pinctrl/mediatek/pinctrl-mtk-common.c
> > @@ -301,8 +301,17 @@ static int mtk_pconf_set_pull_select(struct mtk_pinctrl *pctl,
> > * resistor bit, so we need this special handle.
> > */
> > if (pctl->devdata->spec_pull_set) {
> > - ret = pctl->devdata->spec_pull_set(mtk_get_regmap(pctl, pin),
> > - pin, pctl->devdata->port_align, isup, arg);
> > + if (enable) {
> > + ret = pctl->devdata->spec_pull_set(
> > + mtk_get_regmap(pctl, pin), pin,
> > + pctl->devdata->port_align, isup,
> > + arg);
> > + } else {
> > + ret = pctl->devdata->spec_pull_set(
> > + mtk_get_regmap(pctl, pin), pin,
> > + pctl->devdata->port_align, isup,
> > + MTK_PUPD_SET_R1R0_00);
> > + }
>
>
> it looks like you can use as following snippet with reusing original
> logic and less effort on maintaining these common code (?)
==> Thanks for your suggestion very much. It seems better.
I will change it in v3.
>
>
> if (pctl->devdata->spec_pull_set) {
> + if (!enable)
> + arg = MTK_PUPD_SET_R1R0_00;
>
> ret = pctl->devdata->spec_pull_set(mtk_get_regmap(pctl, pin),
> pin, pctl->devdata->port_align, isup, arg);
>
>
> Also, it's better to add more comments to such kind of special path for
> allowing future SoCs to follow and extend more easily.

==> Thanks for your suggestion very much. I will add more comments here.
>
> > if (!ret)
> > return 0;
> > }
>
>


\
 
 \ /
  Last update: 2018-02-28 08:50    [W:0.062 / U:0.608 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site