lkml.org 
[lkml]   [2018]   [Feb]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH] spi: atmel: init FIFOs before spi enable
From
Date
On 27/02/2018 at 11:25, Eugen Hristev wrote:
> The datasheet recommends initializing FIFOs before
> SPI enable. If we do not do it like this, there may be
> a strange behavior. We noticed that DMA does not work properly
> with FIFOs if we do not clear them beforehand or enable them
> before SPIEN.
>
> Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>

Ok, good:
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>

> ---
> drivers/spi/spi-atmel.c | 8 +++++---
> 1 file changed, 5 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/spi/spi-atmel.c b/drivers/spi/spi-atmel.c
> index 6694709..0478758 100644
> --- a/drivers/spi/spi-atmel.c
> +++ b/drivers/spi/spi-atmel.c
> @@ -1489,6 +1489,11 @@ static void atmel_spi_init(struct atmel_spi *as)
> {
> spi_writel(as, CR, SPI_BIT(SWRST));
> spi_writel(as, CR, SPI_BIT(SWRST)); /* AT91SAM9263 Rev B workaround */
> +
> + /* It is recommended to enable FIFOs first thing after reset */
> + if (as->fifo_size)
> + spi_writel(as, CR, SPI_BIT(FIFOEN));
> +
> if (as->caps.has_wdrbt) {
> spi_writel(as, MR, SPI_BIT(WDRBT) | SPI_BIT(MODFDIS)
> | SPI_BIT(MSTR));
> @@ -1499,9 +1504,6 @@ static void atmel_spi_init(struct atmel_spi *as)
> if (as->use_pdc)
> spi_writel(as, PTCR, SPI_BIT(RXTDIS) | SPI_BIT(TXTDIS));
> spi_writel(as, CR, SPI_BIT(SPIEN));
> -
> - if (as->fifo_size)
> - spi_writel(as, CR, SPI_BIT(FIFOEN));
> }
>
> static int atmel_spi_probe(struct platform_device *pdev)
>


--
Nicolas Ferre

\
 
 \ /
  Last update: 2018-02-27 11:33    [W:0.038 / U:0.272 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site