lkml.org 
[lkml]   [2018]   [Feb]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH v8 0/3] netdev: octeon-ethernet: Add Cavium Octeon III support.
Date
We are adding the Cavium OCTEON-III network driver.  Since interacting
with the input and output queues is done via special CPU local memory,
we also need to add support to the MIPS/Octeon architecture code. The
four patch set to add this prerequisite code has been split out to a
seperate patch set sent to the mips-linux list.

A separate pull request was recently done by Steven Hill for the
firmware required by the driver.

Changes in v8:

o Fixed locking in bgx port functions as noted by davem.

o Corrected SPDX-License-Identifier tags.

o Split driver from prerequisite patches.

Changes in v7:

o There was no v7, we go to v8 to synchronize version numbers with
prerequisites.

Changes in v6:

o Added back cleanup patch for previous generation SoC "staging"
driver, as Greg K-H acked it.

o Moved FPA driver to drivers/net/ethernet/cavium/octeon as it is
currently only used by the octeon3-ethernet driver.

o Many code formatting fixes as noted by davem.

Changes in v5:

o Removed cleanup patch for previous generation SoC "staging" driver,
as it will be sent as a follow-on.

o Fixed kernel doc formatting in all patches.

o Removed redundant licensing text boilerplate.

o Reviewed-by: header added to 2/7.

o Rewrote locking code in 3/7 to eliminate inline asm.

Changes in v4:

o Use phy_print_status() instead of open coding the equivalent.

o Print warning on phy mode mismatch.

o Improve dt-bindings and add Acked-by.

Changes in v3:

o Fix PKI (RX path) initialization to work with little endian kernel.

Changes in v2:

o Cleanup and use of standard bindings in the device tree bindings
document.

o Added (hopefully) clarifying comments about several OCTEON
architectural peculiarities.

o Removed unused testing code from the driver.

o Removed some module parameters that already default to the proper
values.

o KConfig cleanup, including testing on x86_64, arm64 and mips.

o Fixed breakage to the driver for previous generation of OCTEON SoCs (in
the staging directory still).

o Verified bisectability of the patch set.

Carlos Munoz (2):
dt-bindings: Add Cavium Octeon Common Ethernet Interface.
netdev: octeon-ethernet: Add Cavium Octeon III support.

David Daney (1):
MAINTAINERS: Add entry for
drivers/net/ethernet/cavium/octeon/octeon3-*

.../devicetree/bindings/net/cavium-bgx.txt | 61 +
MAINTAINERS | 6 +
drivers/net/ethernet/cavium/Kconfig | 59 +-
drivers/net/ethernet/cavium/octeon/Makefile | 7 +
.../net/ethernet/cavium/octeon/octeon3-bgx-nexus.c | 417 ++++
.../net/ethernet/cavium/octeon/octeon3-bgx-port.c | 2003 +++++++++++++++++++
drivers/net/ethernet/cavium/octeon/octeon3-core.c | 2079 ++++++++++++++++++++
drivers/net/ethernet/cavium/octeon/octeon3-fpa.c | 358 ++++
drivers/net/ethernet/cavium/octeon/octeon3-pki.c | 823 ++++++++
drivers/net/ethernet/cavium/octeon/octeon3-pko.c | 1688 ++++++++++++++++
drivers/net/ethernet/cavium/octeon/octeon3-sso.c | 301 +++
drivers/net/ethernet/cavium/octeon/octeon3.h | 430 ++++
12 files changed, 8222 insertions(+), 10 deletions(-)
create mode 100644 Documentation/devicetree/bindings/net/cavium-bgx.txt
create mode 100644 drivers/net/ethernet/cavium/octeon/octeon3-bgx-nexus.c
create mode 100644 drivers/net/ethernet/cavium/octeon/octeon3-bgx-port.c
create mode 100644 drivers/net/ethernet/cavium/octeon/octeon3-core.c
create mode 100644 drivers/net/ethernet/cavium/octeon/octeon3-fpa.c
create mode 100644 drivers/net/ethernet/cavium/octeon/octeon3-pki.c
create mode 100644 drivers/net/ethernet/cavium/octeon/octeon3-pko.c
create mode 100644 drivers/net/ethernet/cavium/octeon/octeon3-sso.c
create mode 100644 drivers/net/ethernet/cavium/octeon/octeon3.h

--
2.14.3

\
 
 \ /
  Last update: 2018-02-23 00:34    [W:0.043 / U:5.048 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site