lkml.org 
[lkml]   [2018]   [Feb]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v4 00/13] add support for AXP813 ADC and battery power supply
On Mon, Feb 19, 2018 at 01:47:23PM +0100, Quentin Schulz wrote:
> The AXP813 PMIC is relatively close to the already supported AXP20X and
> AXP22X. It provides three different power outputs: battery, AC and USB, and
> measures a few different things: temperature, power supply status, current
> current and voltage supplied, maximum current limit, battery capacity, min
> and max voltage limits.
>
> One of its two GPIOs can be used as an ADC.
>
> There are a few differences with AXP20X/AXP22X PMICs though:
> - a different constant charge current formula,
> - battery temperature, GPIO0 and battery voltages are the only voltages
> measurable,
> - all data are stored on 12 bits (AXP20X/AXP22X had one type of data that
> was stored on 13 bits),
> - different scales and offsets,
> - a different ADC rate formula and register,
>
> This patch series adds support for the PMIC's ADC and battery power supply
> in the existing drivers.
>
> Make the axp20x MFD automatically probe the ADC driver, add the battery
> power supply node in axp81x node and enable it for the TBS A711 since it
> has a soldered battery.
>
> I suggest patches:
> - 1,2,4,10,11,12 go through Maxime and Chen-Yu's tree,

Applied, thanks!
Maxiime

--
Maxime Ripard, Bootlin (formerly Free Electrons)
Embedded Linux and Kernel engineering
https://bootlin.com
[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2018-02-21 10:52    [W:0.076 / U:0.104 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site