lkml.org 
[lkml]   [2018]   [Feb]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[RFC PATCH v3 2/6] x86/entry/64: move ENTER_IRQ_STACK from interrupt macro to interrupt_entry
Date
Moving the switch to IRQ stack from the interrupt macro to the helper
function requires some trickery: All ENTER_IRQ_STACK really cares about
is where the "original" stack -- meaning the GP registers etc. -- is
stored. Therefore, we need to offset the stored RSP value by 8 whenever
ENTER_IRQ_STACK is called from within a function. In such cases, and
after switching to the IRQ stack, we need to push the "original" return
address (i.e. the return address from the call to the interrupt entry
function) to the IRQ stack.

This trickery allows us to carve another .85k from the text size (it
would be more except for the additional unwind hints):

text data bss dec hex filename
18006 0 0 18006 4656 entry_64.o-orig
17158 0 0 17158 4306 entry_64.o

Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
---
arch/x86/entry/entry_64.S | 56 ++++++++++++++++++++++++++++++++---------------
1 file changed, 38 insertions(+), 18 deletions(-)

diff --git a/arch/x86/entry/entry_64.S b/arch/x86/entry/entry_64.S
index b0ae0c3e3815..7a6ae19962ec 100644
--- a/arch/x86/entry/entry_64.S
+++ b/arch/x86/entry/entry_64.S
@@ -448,9 +448,19 @@ END(irq_entries_start)
*
* The invariant is that, if irq_count != -1, then the IRQ stack is in use.
*/
-.macro ENTER_IRQ_STACK regs=1 old_rsp
+.macro ENTER_IRQ_STACK regs=1 old_rsp save_ret=0
DEBUG_ENTRY_ASSERT_IRQS_OFF
+
+ .if \save_ret
+ /*
+ * If save_ret is set, the original stack contains one additional
+ * entry -- the return address. Therefore, move the address one
+ * entry below %rsp to \old_rsp.
+ */
+ leaq 8(%rsp), \old_rsp
+ .else
movq %rsp, \old_rsp
+ .endif

.if \regs
UNWIND_HINT_REGS base=\old_rsp
@@ -496,6 +506,15 @@ END(irq_entries_start)
.if \regs
UNWIND_HINT_REGS indirect=1
.endif
+
+ .if \save_ret
+ /*
+ * Push the return address to the stack. This return address can
+ * be found at the "real" original RSP, which was offset by 8 at
+ * the beginning of this macro.
+ */
+ pushq -8(\old_rsp)
+ .endif
.endm

/*
@@ -531,22 +550,7 @@ ENTRY(interrupt_entry)
PUSH_AND_CLEAR_REGS save_ret=1
ENCODE_FRAME_POINTER 8

- ret
-END(interrupt_entry)
-
-/* 0(%rsp): ~(interrupt number) */
- .macro interrupt func
- cld
-
- testb $3, CS-ORIG_RAX(%rsp)
- jz 1f
- SWAPGS
- call switch_to_thread_stack
-1:
-
- call interrupt_entry
-
- testb $3, CS(%rsp)
+ testb $3, CS+8(%rsp)
jz 1f

/*
@@ -564,10 +568,26 @@ END(interrupt_entry)
CALL_enter_from_user_mode

1:
- ENTER_IRQ_STACK old_rsp=%rdi
+ ENTER_IRQ_STACK old_rsp=%rdi save_ret=1
/* We entered an interrupt context - irqs are off: */
TRACE_IRQS_OFF

+ ret
+END(interrupt_entry)
+
+/* 0(%rsp): ~(interrupt number) */
+ .macro interrupt func
+ cld
+
+ testb $3, CS-ORIG_RAX(%rsp)
+ jz 1f
+ SWAPGS
+ call switch_to_thread_stack
+1:
+
+ call interrupt_entry
+
+ UNWIND_HINT_REGS indirect=1
call \func /* rdi points to pt_regs */
.endm

--
2.16.2
\
 
 \ /
  Last update: 2018-02-20 22:03    [W:0.664 / U:0.872 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site