lkml.org 
[lkml]   [2018]   [Feb]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v3 01/15] dt-bindings: arm: tegra: Remove duplicated Tegra30+ MC binding
Date
There are two bindings for the same Memory Controller. One of the bindings
became obsolete long time ago and probably was left unnoticed, remove it
for consistency.

Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
---
.../bindings/arm/tegra/nvidia,tegra30-mc.txt | 18 ------------------
1 file changed, 18 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/arm/tegra/nvidia,tegra30-mc.txt

diff --git a/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra30-mc.txt b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra30-mc.txt
deleted file mode 100644
index bdf1a612422b..000000000000
--- a/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra30-mc.txt
+++ /dev/null
@@ -1,18 +0,0 @@
-NVIDIA Tegra30 MC(Memory Controller)
-
-Required properties:
-- compatible : "nvidia,tegra30-mc"
-- reg : Should contain 4 register ranges(address and length); see the
- example below. Note that the MC registers are interleaved with the
- SMMU registers, and hence must be represented as multiple ranges.
-- interrupts : Should contain MC General interrupt.
-
-Example:
- memory-controller {
- compatible = "nvidia,tegra30-mc";
- reg = <0x7000f000 0x010
- 0x7000f03c 0x1b4
- 0x7000f200 0x028
- 0x7000f284 0x17c>;
- interrupts = <0 77 0x04>;
- };
--
2.16.1
\
 
 \ /
  Last update: 2018-02-20 17:30    [W:0.112 / U:0.112 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site