lkml.org 
[lkml]   [2018]   [Feb]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 4.15 10/55] crypto: aesni - Fix out-of-bounds access of the data buffer in generic-gcm-aesni
Date
4.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Junaid Shahid <junaids@google.com>

commit b20209c91e23a9bbad9cac2f80bc16b3c259e10e upstream.

The aesni_gcm_enc/dec functions can access memory before the start of
the data buffer if the length of the data buffer is less than 16 bytes.
This is because they perform the read via a single 16-byte load. This
can potentially result in accessing a page that is not mapped and thus
causing the machine to crash. This patch fixes that by reading the
partial block byte-by-byte and optionally an via 8-byte load if the block
was at least 8 bytes.

Fixes: 0487ccac ("crypto: aesni - make non-AVX AES-GCM work with any aadlen")
Signed-off-by: Junaid Shahid <junaids@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
arch/x86/crypto/aesni-intel_asm.S | 87 +++++++++++++++++++-------------------
1 file changed, 45 insertions(+), 42 deletions(-)

--- a/arch/x86/crypto/aesni-intel_asm.S
+++ b/arch/x86/crypto/aesni-intel_asm.S
@@ -257,6 +257,37 @@ aad_shift_arr:
pxor \TMP1, \GH # result is in TMP1
.endm

+# Reads DLEN bytes starting at DPTR and stores in XMMDst
+# where 0 < DLEN < 16
+# Clobbers %rax, DLEN and XMM1
+.macro READ_PARTIAL_BLOCK DPTR DLEN XMM1 XMMDst
+ cmp $8, \DLEN
+ jl _read_lt8_\@
+ mov (\DPTR), %rax
+ MOVQ_R64_XMM %rax, \XMMDst
+ sub $8, \DLEN
+ jz _done_read_partial_block_\@
+ xor %eax, %eax
+_read_next_byte_\@:
+ shl $8, %rax
+ mov 7(\DPTR, \DLEN, 1), %al
+ dec \DLEN
+ jnz _read_next_byte_\@
+ MOVQ_R64_XMM %rax, \XMM1
+ pslldq $8, \XMM1
+ por \XMM1, \XMMDst
+ jmp _done_read_partial_block_\@
+_read_lt8_\@:
+ xor %eax, %eax
+_read_next_byte_lt8_\@:
+ shl $8, %rax
+ mov -1(\DPTR, \DLEN, 1), %al
+ dec \DLEN
+ jnz _read_next_byte_lt8_\@
+ MOVQ_R64_XMM %rax, \XMMDst
+_done_read_partial_block_\@:
+.endm
+
/*
* if a = number of total plaintext bytes
* b = floor(a/16)
@@ -1386,14 +1417,6 @@ _esb_loop_\@:
*
* AAD Format with 64-bit Extended Sequence Number
*
-* aadLen:
-* from the definition of the spec, aadLen can only be 8 or 12 bytes.
-* The code supports 16 too but for other sizes, the code will fail.
-*
-* TLen:
-* from the definition of the spec, TLen can only be 8, 12 or 16 bytes.
-* For other sizes, the code will fail.
-*
* poly = x^128 + x^127 + x^126 + x^121 + 1
*
*****************************************************************************/
@@ -1487,19 +1510,16 @@ _zero_cipher_left_decrypt:
PSHUFB_XMM %xmm10, %xmm0

ENCRYPT_SINGLE_BLOCK %xmm0, %xmm1 # E(K, Yn)
- sub $16, %r11
- add %r13, %r11
- movdqu (%arg3,%r11,1), %xmm1 # receive the last <16 byte block
- lea SHIFT_MASK+16(%rip), %r12
- sub %r13, %r12
-# adjust the shuffle mask pointer to be able to shift 16-%r13 bytes
-# (%r13 is the number of bytes in plaintext mod 16)
- movdqu (%r12), %xmm2 # get the appropriate shuffle mask
- PSHUFB_XMM %xmm2, %xmm1 # right shift 16-%r13 butes

+ lea (%arg3,%r11,1), %r10
+ mov %r13, %r12
+ READ_PARTIAL_BLOCK %r10 %r12 %xmm2 %xmm1
+
+ lea ALL_F+16(%rip), %r12
+ sub %r13, %r12
movdqa %xmm1, %xmm2
pxor %xmm1, %xmm0 # Ciphertext XOR E(K, Yn)
- movdqu ALL_F-SHIFT_MASK(%r12), %xmm1
+ movdqu (%r12), %xmm1
# get the appropriate mask to mask out top 16-%r13 bytes of %xmm0
pand %xmm1, %xmm0 # mask out top 16-%r13 bytes of %xmm0
pand %xmm1, %xmm2
@@ -1508,9 +1528,6 @@ _zero_cipher_left_decrypt:

pxor %xmm2, %xmm8
GHASH_MUL %xmm8, %xmm13, %xmm9, %xmm10, %xmm11, %xmm5, %xmm6
- # GHASH computation for the last <16 byte block
- sub %r13, %r11
- add $16, %r11

# output %r13 bytes
MOVQ_R64_XMM %xmm0, %rax
@@ -1664,14 +1681,6 @@ ENDPROC(aesni_gcm_dec)
*
* AAD Format with 64-bit Extended Sequence Number
*
-* aadLen:
-* from the definition of the spec, aadLen can only be 8 or 12 bytes.
-* The code supports 16 too but for other sizes, the code will fail.
-*
-* TLen:
-* from the definition of the spec, TLen can only be 8, 12 or 16 bytes.
-* For other sizes, the code will fail.
-*
* poly = x^128 + x^127 + x^126 + x^121 + 1
***************************************************************************/
ENTRY(aesni_gcm_enc)
@@ -1764,19 +1773,16 @@ _zero_cipher_left_encrypt:
movdqa SHUF_MASK(%rip), %xmm10
PSHUFB_XMM %xmm10, %xmm0

-
ENCRYPT_SINGLE_BLOCK %xmm0, %xmm1 # Encrypt(K, Yn)
- sub $16, %r11
- add %r13, %r11
- movdqu (%arg3,%r11,1), %xmm1 # receive the last <16 byte blocks
- lea SHIFT_MASK+16(%rip), %r12
+
+ lea (%arg3,%r11,1), %r10
+ mov %r13, %r12
+ READ_PARTIAL_BLOCK %r10 %r12 %xmm2 %xmm1
+
+ lea ALL_F+16(%rip), %r12
sub %r13, %r12
- # adjust the shuffle mask pointer to be able to shift 16-r13 bytes
- # (%r13 is the number of bytes in plaintext mod 16)
- movdqu (%r12), %xmm2 # get the appropriate shuffle mask
- PSHUFB_XMM %xmm2, %xmm1 # shift right 16-r13 byte
pxor %xmm1, %xmm0 # Plaintext XOR Encrypt(K, Yn)
- movdqu ALL_F-SHIFT_MASK(%r12), %xmm1
+ movdqu (%r12), %xmm1
# get the appropriate mask to mask out top 16-r13 bytes of xmm0
pand %xmm1, %xmm0 # mask out top 16-r13 bytes of xmm0
movdqa SHUF_MASK(%rip), %xmm10
@@ -1785,9 +1791,6 @@ _zero_cipher_left_encrypt:
pxor %xmm0, %xmm8
GHASH_MUL %xmm8, %xmm13, %xmm9, %xmm10, %xmm11, %xmm5, %xmm6
# GHASH computation for the last <16 byte block
- sub %r13, %r11
- add $16, %r11
-
movdqa SHUF_MASK(%rip), %xmm10
PSHUFB_XMM %xmm10, %xmm0


\
 
 \ /
  Last update: 2018-02-02 18:45    [W:0.310 / U:0.292 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site