lkml.org 
[lkml]   [2018]   [Feb]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
SubjectRe: [PATCH v2 09/16] mmc: sdhci: Add quirk to disable HW timeout
From
Date
On 05/02/18 14:50, Kishon Vijay Abraham I wrote:
> Add quirk to disable HW timeout if the requested timeout is more than
> the maximum obtainable timeout.
>
> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
> ---
> drivers/mmc/host/sdhci.c | 12 ++++++++++++
> drivers/mmc/host/sdhci.h | 7 +++++++
> 2 files changed, 19 insertions(+)
>
> diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
> index 070aff9c108f..1aa74b4682f3 100644
> --- a/drivers/mmc/host/sdhci.c
> +++ b/drivers/mmc/host/sdhci.c
> @@ -735,6 +735,12 @@ static u8 sdhci_calc_timeout(struct sdhci_host *host, struct mmc_command *cmd)
> DBG("Too large timeout 0x%x requested for CMD%d!\n",
> count, cmd->opcode);
> count = 0xE;
> + if (host->quirks2 & SDHCI_QUIRK2_DISABLE_HW_TIMEOUT) {
> + host->ier &= ~SDHCI_INT_DATA_TIMEOUT;
> + sdhci_writel(host, host->ier, SDHCI_INT_ENABLE);
> + sdhci_writel(host, host->ier, SDHCI_SIGNAL_ENABLE);
> + host->hw_timeout_disabled = true;
> + }

sdhci_calc_timeout() is really for calculations so please do this in
sdhci_set_timeout() instead (i.e. change sdhci_calc_timeout() to return
whether the timeout is too big). Note that you need to cater for the "/*
Unspecified timeout, assume max */" case and the
SDHCI_QUIRK_BROKEN_TIMEOUT_VAL case.

Also if SDHCI_INT_DATA_TIMEOUT is not being disabled, check here to
re-enable it and leave sdhci_request_done() alone. i.e.

else if (!(host->ier & SDHCI_INT_DATA_TIMEOUT)) {
host->ier |= SDHCI_INT_DATA_TIMEOUT;
sdhci_writel(host, host->ier, SDHCI_INT_ENABLE);
sdhci_writel(host, host->ier, SDHCI_SIGNAL_ENABLE);
}

Maybe make a separate subroutine for the update:

void sdhci_set_data_timeout_irq(struct sdhci_host *host, bool enable)
{
if (enable)
host->ier |= SDHCI_INT_DATA_TIMEOUT;
else
host->ier &= ~SDHCI_INT_DATA_TIMEOUT;
sdhci_writel(host, host->ier, SDHCI_INT_ENABLE);
sdhci_writel(host, host->ier, SDHCI_SIGNAL_ENABLE);
}


> }
>
> return count;
> @@ -2349,6 +2355,12 @@ static bool sdhci_request_done(struct sdhci_host *host)
> }
>
> sdhci_del_timer(host, mrq);
> + if (sdhci_data_line_cmd(mrq->cmd) && host->hw_timeout_disabled) {
> + host->ier |= SDHCI_INT_DATA_TIMEOUT;
> + sdhci_writel(host, host->ier, SDHCI_INT_ENABLE);
> + sdhci_writel(host, host->ier, SDHCI_SIGNAL_ENABLE);
> + host->hw_timeout_disabled = false;
> + }
>
> /*
> * Always unmap the data buffers if they were mapped by
> diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h
> index afab26fd70e6..3a967a56fcc3 100644
> --- a/drivers/mmc/host/sdhci.h
> +++ b/drivers/mmc/host/sdhci.h
> @@ -437,6 +437,11 @@ struct sdhci_host {
> #define SDHCI_QUIRK2_CLOCK_DIV_ZERO_BROKEN (1<<15)
> /* Controller has CRC in 136 bit Command Response */
> #define SDHCI_QUIRK2_RSP_136_HAS_CRC (1<<16)
> +/*
> + * Disable HW timeout if the requested timeout is more than the maximum
> + * obtainable timeout
> + */
> +#define SDHCI_QUIRK2_DISABLE_HW_TIMEOUT (1<<17)
>
> int irq; /* Device IRQ */
> void __iomem *ioaddr; /* Mapped address */
> @@ -522,6 +527,8 @@ struct sdhci_host {
> unsigned int ocr_avail_mmc;
> u32 ocr_mask; /* available voltages */
>
> + bool hw_timeout_disabled;
> +
> unsigned timing; /* Current timing */
>
> u32 thread_isr;
>

\
 
 \ /
  Last update: 2018-02-19 09:52    [W:0.229 / U:0.236 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site