lkml.org 
[lkml]   [2018]   [Feb]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v3] rtc: ac100: Fix ac100 determine rate bug
From
Date


On 16.02.2018 14:15, Chen-Yu Tsai wrote:
> On Fri, Feb 16, 2018 at 9:07 PM, Maxime Ripard
> <maxime.ripard@bootlin.com> wrote:
>> On Fri, Feb 16, 2018 at 12:10:18PM +0800, Chen-Yu Tsai wrote:
>>>> diff --git a/arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts
>>>> b/arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts
>>>> index 6550bf0e594b..6f56d429f17e 100644
>>>> --- a/arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts
>>>> +++ b/arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts
>>>> @@ -175,11 +175,18 @@
>>>> compatible = "x-powers,ac100-rtc";
>>>> interrupt-parent = <&r_intc>;
>>>> interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
>>>> - clocks = <&ac100_codec>;
>>>> + clocks = <&ac100_rtc_32k>;
>>>> #clock-cells = <1>;
>>>> clock-output-names = "cko1_rtc",
>>>> "cko2_rtc",
>>>> "cko3_rtc";
>>>> +
>>>> + ac100_rtc_32k: rtc-32k-oscillator {
>>>> + compatible = "fixed-clock";
>>>> + #clock-cells = <0>;
>>>> + clock-frequency = <32768>;
>>>> + clock-output-names = "ac100-rtc-32k";
>>>> + };
>>>> };
>>>> };
>>>> };
>>>>
>>>> What do you think about that solution?
>>>
>>> That's not quite right either. As I mentioned before, the
>>> RTC block has two clock inputs, one 4MHz signal from the
>>> codec block, and one 32.768 kHz signal from an external
>>> crystal. The original device tree binding describes the
>>> first one, and the 32.768 kHz clock was registered by
>>> the RTC driver internally.
>>>
>>> If you're going to add the crystal clock, you still need
>>> to keep the codec one. Note that this does not fix what
>>> Maxime is asking you. I've already provided an explanation:
>>>
>>> The clock core allows registering clocks with not-yet-existing
>>> clock parents. Parents are matches by string names. If no
>>> clock by that name is registered yet, the clock core simply
>>> orphans the new clock if the unregistered parent is its
>>> current parent or simply ignores that parent if its not the
>>> current parent. This is entirely valid and is what we are
>>> counting on here, as we haven't implemented the codec-side
>>> driver.
>>
>> So, we end up in a situation where clk_hw_get_num_parents returns the
>> amount of clocks we can be parented to (orphans or not), but
>> clk_hw_get_parent_by_index will not return the orphan clocks?
>
> There is no placeholder for missing parents, unlike the regulator
> subsystem that has a dummy regulator for this purpose.
>
>> That's pretty bad :/
>
> Yeah. I didn't expect this to happen. But to be fair, I should
> have done the check on clk_hw_get_parent_by_index.
>
>> Is there a way to test before registering that all our parents are
>> actually there? clk_get?
>
> That's probably the way to do it. However in the AC100 RTC case,
> I left it open to be missing on purpose, so we could use the RTC
> without waiting for the codec to be supported.
>
> ChenYu
>

So how should we proceed with this issue?

Should I send a new version with a fixed comment or should I implement
the check in clk_get function?

For the second option I will need about 3 weeks to submit a proper patch
since I have the next two weeks some other stuff to do.
If a proper fix is required earlier, it might be better if someone else
is taking care about a fix.

Philipp

\
 
 \ /
  Last update: 2018-02-18 18:56    [W:2.034 / U:0.004 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site