Messages in this thread Patch in this message | | | From | Bartosz Golaszewski <> | Subject | [PATCH 6/6] ARM: davinci: use aemif platform driver in legacy mode for da850-evm | Date | Fri, 16 Feb 2018 17:47:12 +0100 |
| |
From: Bartosz Golaszewski <bgolaszewski@baylibre.com>
We now support board files in aemif. Use the platform driver instead of the handcrafted API in da850-evm.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> --- arch/arm/mach-davinci/board-da850-evm.c | 93 ++++++++++++++++++--------------- 1 file changed, 51 insertions(+), 42 deletions(-)
diff --git a/arch/arm/mach-davinci/board-da850-evm.c b/arch/arm/mach-davinci/board-da850-evm.c index 828194045a2b..88e1d00a1f56 100644 --- a/arch/arm/mach-davinci/board-da850-evm.c +++ b/arch/arm/mach-davinci/board-da850-evm.c @@ -33,6 +33,7 @@ #include <linux/platform_data/gpio-davinci.h> #include <linux/platform_data/mtd-davinci.h> #include <linux/platform_data/mtd-davinci-aemif.h> +#include <linux/platform_data/ti-aemif.h> #include <linux/platform_data/spi-davinci.h> #include <linux/platform_data/uio_pruss.h> #include <linux/regulator/machine.h> @@ -185,16 +186,6 @@ static struct resource da850_evm_norflash_resource[] = { }, }; -static struct platform_device da850_evm_norflash_device = { - .name = "physmap-flash", - .id = 0, - .dev = { - .platform_data = &da850_evm_norflash_data, - }, - .num_resources = 1, - .resource = da850_evm_norflash_resource, -}; - /* DA850/OMAP-L138 EVM includes a 512 MByte large-page NAND flash * (128K blocks). It may be used instead of the (default) SPI flash * to boot, using TI's tools to install the secondary boot loader @@ -265,37 +256,58 @@ static struct resource da850_evm_nandflash_resource[] = { }, }; -static struct platform_device da850_evm_nandflash_device = { - .name = "davinci-nand", - .id = 1, - .dev = { - .platform_data = &da850_evm_nandflash_data, - }, - .num_resources = ARRAY_SIZE(da850_evm_nandflash_resource), - .resource = da850_evm_nandflash_resource, +static struct resource da850_evm_aemif_resource[] = { + { + .start = DA8XX_AEMIF_CTL_BASE, + .end = DA8XX_AEMIF_CTL_BASE + SZ_32K, + .flags = IORESOURCE_MEM, + } }; -static struct platform_device *da850_evm_devices[] = { - &da850_evm_nandflash_device, - &da850_evm_norflash_device, +static struct aemif_abus_data da850_evm_aemif_abus_data[] = { + { + .cs = 3, + } }; -#define DA8XX_AEMIF_CE2CFG_OFFSET 0x10 -#define DA8XX_AEMIF_ASIZE_16BIT 0x1 - -static void __init da850_evm_init_nor(void) -{ - void __iomem *aemif_addr; - - aemif_addr = ioremap(DA8XX_AEMIF_CTL_BASE, SZ_32K); +static struct platform_device da850_evm_aemif_devices[] = { + { + .name = "davinci-nand", + .id = 1, + .dev = { + .platform_data = &da850_evm_nandflash_data, + }, + .num_resources = ARRAY_SIZE(da850_evm_nandflash_resource), + .resource = da850_evm_nandflash_resource, + }, + { + .name = "physmap-flash", + .id = 0, + .dev = { + .platform_data = &da850_evm_norflash_data, + }, + .num_resources = 1, + .resource = da850_evm_norflash_resource, + } +}; - /* Configure data bus width of CS2 to 16 bit */ - writel(readl(aemif_addr + DA8XX_AEMIF_CE2CFG_OFFSET) | - DA8XX_AEMIF_ASIZE_16BIT, - aemif_addr + DA8XX_AEMIF_CE2CFG_OFFSET); +static struct aemif_platform_data da850_evm_aemif_pdata = { + .cs_offset = 2, + .abus_data = da850_evm_aemif_abus_data, + .num_abus_data = ARRAY_SIZE(da850_evm_aemif_abus_data), + .sub_devices = da850_evm_aemif_devices, + .num_sub_devices = ARRAY_SIZE(da850_evm_aemif_devices), +}; - iounmap(aemif_addr); -} +static struct platform_device da850_evm_aemif_device = { + .name = "ti-aemif", + .dev = { + .platform_data = &da850_evm_aemif_pdata, + }, + .resource = da850_evm_aemif_resource, + .num_resources = ARRAY_SIZE(da850_evm_aemif_resource), + .id = -1, +}; static const short da850_evm_nand_pins[] = { DA850_EMA_D_0, DA850_EMA_D_1, DA850_EMA_D_2, DA850_EMA_D_3, @@ -338,13 +350,10 @@ static inline void da850_evm_setup_nor_nand(void) pr_warn("%s: NOR mux setup failed: %d\n", __func__, ret); - da850_evm_init_nor(); - - platform_add_devices(da850_evm_devices, - ARRAY_SIZE(da850_evm_devices)); - - if (davinci_aemif_setup(&da850_evm_nandflash_device)) - pr_warn("%s: Cannot configure AEMIF.\n", __func__); + ret = platform_device_register(&da850_evm_aemif_device); + if (ret) + pr_warn("%s: registering aemif failed: %d\n", + __func__, ret); } } -- 2.16.1
| |