lkml.org 
[lkml]   [2018]   [Feb]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH 6/8] arm64: dts: renesas: r8a77995-draak: Enable DU
From
Date
Hi Laurent, Simon,

On 15/02/18 14:12, Laurent Pinchart wrote:
> Hi Kieran,
>
> Thank you for the patch.
>
> On Thursday, 15 February 2018 10:38:21 EET Kieran Bingham wrote:
>> From: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
>>
>> Enable the DU, providing only the VGA output for now.
>>
>> Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
>
> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
>
> I assume Simon will take care of this patch.

That will be great, - One small caveat on this patch though:


>> ---
>> arch/arm64/boot/dts/renesas/r8a77995-draak.dts | 51 +++++++++++++++++++++++
>> 1 file changed, 51 insertions(+)
>>
>> diff --git a/arch/arm64/boot/dts/renesas/r8a77995-draak.dts
>> b/arch/arm64/boot/dts/renesas/r8a77995-draak.dts index
>> af07da240be0..668e246dfc5d 100644
>> --- a/arch/arm64/boot/dts/renesas/r8a77995-draak.dts
>> +++ b/arch/arm64/boot/dts/renesas/r8a77995-draak.dts
>> @@ -27,6 +27,38 @@
>> stdout-path = "serial0:115200n8";
>> };
>>
>> + vga {
>> + compatible = "vga-connector";
>> +
>> + port {
>> + vga_in: endpoint {
>> + remote-endpoint = <&adv7123_out>;
>> + };
>> + };
>> + };
>> +
>> + vga-encoder {
>> + compatible = "adi,adv7123";
>> +
>> + ports {
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> +
>> + port@0 {
>> + reg = <0>;
>> + adv7123_in: endpoint {
>> + remote-endpoint = <&du_out_rgb>;
>> + };
>> + };
>> + port@1 {
>> + reg = <1>;
>> + adv7123_out: endpoint {
>> + remote-endpoint = <&vga_in>;
>> + };
>> + };
>> + };
>> + };
>> +
>> memory@48000000 {
>> device_type = "memory";
>> /* first 128MB is reserved for secure area. */
>> @@ -46,6 +78,11 @@
>> };
>> };
>>
>> + du_pins: du {
>> + groups = "du_rgb888", "du_sync", "du_disp", "du_dotclkout0";

The du_dotclkout0 is named differently in Uli's patch. (Of course I believe my
version is correct, but there is some precedent set it would seem).

Anyway, If Uli's version of the PFC is accepted (Which I'm sure it will be),
then I will have to re-spin this patch with the 'different' "du_clk_out_0" value
in the groups.

--
Kieran


>> + function = "du";
>> + };
>> +
>> i2c0_pins: i2c0 {
>> groups = "i2c0";
>> function = "i2c0";
>> @@ -95,6 +132,20 @@
>> status = "okay";
>> };
>>
>> +&du {
>> + pinctrl-0 = <&du_pins>;
>> + pinctrl-names = "default";
>> + status = "okay";
>> +
>> + ports {
>> + port@0 {
>> + endpoint {
>> + remote-endpoint = <&adv7123_in>;
>> + };
>> + };
>> + };
>> +};
>> +
>> &ehci0 {
>> status = "okay";
>> };
>
>

\
 
 \ /
  Last update: 2018-02-15 15:31    [W:0.367 / U:0.376 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site