lkml.org 
[lkml]   [2018]   [Feb]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 1/2] mmc: bcm2835: reset host on timeout
Hi Michal,

> Michal Suchánek <msuchanek@suse.de> hat am 14. Februar 2018 um 20:24 geschrieben:
>
>
> On Wed, 14 Feb 2018 17:49:31 +0100
> Stefan Wahren <stefan.wahren@i2se.com> wrote:
>
> > Hi Michal,
> >
> > [add Phil]
> >
> > Am 14.02.2018 um 17:13 schrieb Michal Suchánek:
> > > On Wed, 14 Feb 2018 16:36:49 +0100
> > > Michal Suchánek <msuchanek@suse.de> wrote:
> > >
> > >> On Wed, 14 Feb 2018 15:58:31 +0100
> > >> Stefan Wahren <stefan.wahren@i2se.com> wrote:
> > >>
> > >>> Hi Michal,
> > >>>
> > >>> Am 14.02.2018 um 15:38 schrieb Michal Suchanek:
> > >>>> The bcm2835 mmc host tends to lock up for unknown reason so reset
> > >>>> it on timeout. The upper mmc block layer tries retransimitting
> > >>>> with single blocks which tends to work out after a long wait.
> > >>>>
> > >>>> This is better than giving up and leaving the machine broken for
> > >>>> no obvious reason.
> > >>> could you please provide more information about this issue
> > >>> (affected hardware, kernel config, version, dmesg, reproducible
> > >>> scenario)?
> > > It tends to reproduce when upgrading a few packages with zypper and
> > > otherwise at random during system operation. It seems that for my
> > > card it worsens with age to some degree so perhaps it depends on the
> > > fragmentation of the internal card flash.
> > >
> > > Attaching dmesg and kernel config.
> >
> > do you noticed this issue before 4.15-rc4?
>
> I initially noticed it with 4.4 kernel with some backports to make it
> bootable on RPi.

this confuses me. Gerd and i ported this driver from downstream and finally it's got merged in 4.12.

So do you mean that you backported the mainline version to 4.4 or the downstream version of 4.4?

On a quick look they seems identical, but they aren't.

> >
> > Could you please test with 4.15 final again?
>
> Right, I can apply the patches on something more recent.
>
> >
> > What kind of SD card (name) triggers the issue?
>
> Samsung EVO MB-MP16D

Thanks

>
> Also see https://elinux.org/RPi_SD_cards#Which_SD_card.3F

I'm very sceptical about this list. The card above is listed as OK and NOK. The experienced issues doesn't need to be direct related to the card (unproperly umounted, bad driver, ...).

Stefan

>
> Thanks
>
> Michal
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

\
 
 \ /
  Last update: 2018-02-14 21:32    [W:0.928 / U:0.240 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site