lkml.org 
[lkml]   [2018]   [Feb]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH] Bluetooth: btusb: Restore QCA Rome suspend/resume fix with a "rewritten" version
From
Date
Hi,

On 13-02-18 03:24, Brian Norris wrote:
> Hi,
>
> On Mon, Jan 08, 2018 at 10:44:16AM +0100, Hans de Goede wrote:
>> Commit 7d06d5895c15 ("Revert "Bluetooth: btusb: fix QCA...suspend/resume"")
>> removed the setting of the BTUSB_RESET_RESUME quirk for QCA Rome devices,
>> instead favoring adding USB_QUIRK_RESET_RESUME quirks in usb/core/quirks.c.
>>
>> This was done because the DIY BTUSB_RESET_RESUME reset-resume handling
>> has several issues (see the original commit message). An added advantage
>> of moving over to the USB-core reset-resume handling is that it also
>> disables autosuspend for these devices, which is similarly broken on these.
>
> Wait, is autosuspend actually broken for all QCA Rome chipsets? I don't
> think so -- I'm using one now.

And have you manually enabled USB autosuspend for it, or are you
running something which might have done so, e.g. powertop --auto-tune ?

Because if you did not do that then you're already not using autosuspend
for your QCA devices and this patch will change nothing.

> Thus, this is a poor solution, which
> negatively affects my systems. However, I see that this patch was
> applied regardless...

Note that there already is a quirk to handle broken suspend/resume
behavior on ALL QCA devices in older kernels. Also note that the
patches series which this commit builds on top of was already
setting USB_QUIRK_RESET_RESUME for some devices in
usb/core/quirks.c.

All my commit does is instead of duplicating all the QCA USB-ids in
usb/core/quirks.c, move the setting of USB_QUIRK_RESET_RESUME
to btusb.c so that we don't need to duplicate the USB-id tables.

The result of the combination of these patches is that the custom
DIY reset on resume handling btusb.c was doing is now replaced
by setting the standard USB-core USB_QUIRK_RESET_RESUME quirk.

As a (desirable) side effect this also disables USB autosuspend
for QCA devices since the USB-core does not allow USB autosuspend
on devices with the USB_QUIRK_RESET_RESUME quirk. Testing has shown
this to be necessary on at least some QCA devices and given that
these devices tend to loose there firmware on a suspend, it seems
sensible to not allow autosuspend on them.

> What justifications was found for this anyway? AIUI, this is a platform
> bug, and not entirely a chipset bug.

No this is believed to be a chipset issue, hence also the quirk in
older kernels to always reset these devices after a normal suspend/resume.

Regards,

Hans




>
> Brian
>
>> But there are 2 issues with this approach:
>> 1) It leaves the broken DIY BTUSB_RESET_RESUME code in place for Realtek
>> devices.
>> 2) Sofar only 2 of the 10 QCA devices known to the btusb code have been
>> added to usb/core/quirks.c and if we fix the Realtek case the same way
>> we need to add an additional 14 entries. So in essence we need to
>> duplicate a large part of the usb_device_id table in btusb.c in
>> usb/core/quirks.c and manually keep them in sync.
>>
>> This commit instead restores setting a reset-resume quirk for QCA devices
>> in the btusb.c code, avoiding the duplicate usb_device_id table problem.
>>
>> This commit avoids the problems with the original DIY BTUSB_RESET_RESUME
>> code by simply setting the USB_QUIRK_RESET_RESUME quirk directly on the
>> usb_device.
>>
>> This commit also moves the BTUSB_REALTEK case over to directly setting the
>> USB_QUIRK_RESET_RESUME on the usb_device and removes the now unused
>> BTUSB_RESET_RESUME code.
>>
>> BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1514836
>> Fixes: 7d06d5895c15 ("Revert "Bluetooth: btusb: fix QCA...suspend/resume"")
>> Cc: stable@vger.kernel.org
>> Cc: Leif Liddy <leif.linux@gmail.com>
>> Cc: Matthias Kaehlcke <mka@chromium.org>
>> Cc: Brian Norris <briannorris@chromium.org>
>> Cc: Daniel Drake <drake@endlessm.com>
>> Cc: Kai-Heng Feng <kai.heng.feng@canonical.com>
>> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
>> ---
>> Note:
>> 1) Once this has been merged, the 2 commits adding QCA device entries to
>> drivers/usb/core/quirks.c should be reverted or dropped from bluetooth-next.
>> 2) I don't have any of the affected devices, please test
>> ---
>> drivers/bluetooth/btusb.c | 22 ++++++++++------------
>> 1 file changed, 10 insertions(+), 12 deletions(-)
>>
>> diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
>> index 4764100a5888..c4689f03220f 100644
>> --- a/drivers/bluetooth/btusb.c
>> +++ b/drivers/bluetooth/btusb.c
>> @@ -23,6 +23,7 @@
>>
>> #include <linux/module.h>
>> #include <linux/usb.h>
>> +#include <linux/usb/quirks.h>
>> #include <linux/firmware.h>
>> #include <linux/of_device.h>
>> #include <linux/of_irq.h>
>> @@ -388,9 +389,8 @@ static const struct usb_device_id blacklist_table[] = {
>> #define BTUSB_FIRMWARE_LOADED 7
>> #define BTUSB_FIRMWARE_FAILED 8
>> #define BTUSB_BOOTING 9
>> -#define BTUSB_RESET_RESUME 10
>> -#define BTUSB_DIAG_RUNNING 11
>> -#define BTUSB_OOB_WAKE_ENABLED 12
>> +#define BTUSB_DIAG_RUNNING 10
>> +#define BTUSB_OOB_WAKE_ENABLED 11
>>
>> struct btusb_data {
>> struct hci_dev *hdev;
>> @@ -3118,6 +3118,12 @@ static int btusb_probe(struct usb_interface *intf,
>> if (id->driver_info & BTUSB_QCA_ROME) {
>> data->setup_on_usb = btusb_setup_qca;
>> hdev->set_bdaddr = btusb_set_bdaddr_ath3012;
>> +
>> + /* QCA Rome devices lose their updated firmware over suspend,
>> + * but the USB hub doesn't notice any status change.
>> + * explicitly request a device reset on resume.
>> + */
>> + interface_to_usbdev(intf)->quirks |= USB_QUIRK_RESET_RESUME;
>> }
>>
>> #ifdef CONFIG_BT_HCIBTUSB_RTL
>> @@ -3128,7 +3134,7 @@ static int btusb_probe(struct usb_interface *intf,
>> * but the USB hub doesn't notice any status change.
>> * Explicitly request a device reset on resume.
>> */
>> - set_bit(BTUSB_RESET_RESUME, &data->flags);
>> + interface_to_usbdev(intf)->quirks |= USB_QUIRK_RESET_RESUME;
>> }
>> #endif
>>
>> @@ -3297,14 +3303,6 @@ static int btusb_suspend(struct usb_interface *intf, pm_message_t message)
>> enable_irq(data->oob_wake_irq);
>> }
>>
>> - /* Optionally request a device reset on resume, but only when
>> - * wakeups are disabled. If wakeups are enabled we assume the
>> - * device will stay powered up throughout suspend.
>> - */
>> - if (test_bit(BTUSB_RESET_RESUME, &data->flags) &&
>> - !device_may_wakeup(&data->udev->dev))
>> - data->udev->reset_resume = 1;
>> -
>> return 0;
>> }
>>
>> --
>> 2.14.3
>>

\
 
 \ /
  Last update: 2018-02-13 12:26    [W:0.085 / U:0.772 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site