lkml.org 
[lkml]   [2018]   [Feb]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 2/2] i2c: piix4: Use usleep_range()
Hi Jean,

On Mon, Feb 12, 2018 at 11:53:36AM +0100, Jean Delvare wrote:
> Hi Guenter,
>
> On Sat, 30 Dec 2017 08:50:58 -0800, Guenter Roeck wrote:
> > The piix4 i2c driver is extremely slow. Replacing msleep()
> > with usleep_range() increases its speed substantially.
> >
> > Signed-off-by: Guenter Roeck <linux@roeck-us.net>
> > ---
> > drivers/i2c/busses/i2c-piix4.c | 6 +++---
> > 1 file changed, 3 insertions(+), 3 deletions(-)
> >
> > diff --git a/drivers/i2c/busses/i2c-piix4.c b/drivers/i2c/busses/i2c-piix4.c
> > index 78dd5951d6e7..52a8b1c5c110 100644
> > --- a/drivers/i2c/busses/i2c-piix4.c
> > +++ b/drivers/i2c/busses/i2c-piix4.c
> > @@ -467,13 +467,13 @@ static int piix4_transaction(struct i2c_adapter *piix4_adapter)
> >
> > /* We will always wait for a fraction of a second! (See PIIX4 docs errata) */
> > if (srvrworks_csb5_delay) /* Extra delay for SERVERWORKS_CSB5 */
> > - msleep(2);
> > + usleep_range(2000, 2000);
>
> Isn't this exactly the same? I'm fine using the same function for
> consistency, just curious.
>
No, it isn't. msleep() tends to sleep much longer then requested.
uspeep_range() tends to be much more accurate.

> > else
> > - msleep(1);
> > + usleep_range(500, 1000);
>
> Were you able to test this on older hardware? Unfortunately, the

No, the only AMD CPUs I have are Ryzen.

> specification errata of the original Intel PIIX4 is quite vague on the
> amount of time you must wait before checking the Host Busy bit:
>
> "Note that there may be moderate latency before the transaction begins
> and the Host Busy bit gets set."
>
> I guess we made it 1 ms at the time because it was the minimum we could
> sleep anyway.
>
> One option if you really care about the performance of the i2c-piix4
> driver on recent hardware would be to lower the initial delay even more
> for ATI and AMD chipsets. The errata was for Intel chipsets originally,
> and while we know that at least some of the ServerWorks implementations
> suffered from the same problem (worse actually) I don't think that
> anybody ever bothered checking if it applied to more recent
> implementations by other vendors.
>
> For reference, at 93.75 kHz (the default SMBus frequency or the SB800),
> an SMBus Quick transaction would be completed in 117 us, so I guess an
> initial delay of 150 or 200 us would be optimum. And an SMBus Read Byte
> transaction completes in 416 ms. I think this is the most popular SMBus
> transaction, so ensuring that it is as fast as possible would make
> sense.
>
> And it might even work on older Intel chipsets, who knows. Plus I doubt
> anyone is still using them anyway, so you have my approval to lower the
> delays to whatever works for you.
>
> As a comparison point, in the i2c-i801 driver we use:
>
> usleep_range(250, 500);
>
> for both the initial sleep and the waiting loop.
>
> >
> > while ((++timeout < MAX_TIMEOUT) &&
> > ((temp = inb_p(SMBHSTSTS)) & 0x01))
> > - msleep(1);
> > + usleep_range(200, 500);
>
> Note that you are also drastically reducing the effective timeout value
> here, because it is a counter and not an overall time. Beforehand, we
> would wait for at least 501 ms for the transaction to complete. Now
> this could be down to only 100 ms. That being said, if my math is
> right, the longest supported transaction (Block Read) at the slowest
> allowed SMBus clock speed (10 kHz) would be done in 33 ms, so we are
> still good.
>
> >
> > /* If the SMBus is still busy, we give up */
> > if (timeout == MAX_TIMEOUT) {
>
> Reviewed-by: Jean Delvare <jdelvare@suse.de>
>
Not sure I follow, overall. What changes, if any, do you expect me to make ?

Thanks,
Guenter

> --
> Jean Delvare
> SUSE L3 Support

\
 
 \ /
  Last update: 2018-02-12 22:00    [W:0.108 / U:0.040 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site