lkml.org 
[lkml]   [2018]   [Feb]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 16/21] regulator: wm8994: Pass descriptor instead of GPIO number
On Mon, 12 Feb 2018, Linus Walleij wrote:

> Instead of passing a global GPIO number for the enable GPIO, pass
> a descriptor looked up from the device tree node or the board file
> decriptor table for the regulator.
>
> There is a single board file passing the GPIOs for LDO1 and LDO2
> through platform data, so augment this to pass descriptors
> associated with the i2c device as well.
>
> Cc: patches@opensource.cirrus.com
> Cc: Charles Keepax <ckeepax@opensource.cirrus.com>
> Cc: Lee Jones <lee.jones@linaro.org>
> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
> ---
> Lee: this patch is touching the MFD core driver for WM8994,
> but as with all other patches we just change the regulator
> parts. Would be nice if you could ACK it.

Fine, but any sign of a conflict and I'll need a PR.

Acked-by: Lee Jones <lee.jones@linaro.org>

--
Lee Jones
Linaro Services Technical Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog

\
 
 \ /
  Last update: 2018-02-12 15:59    [W:0.326 / U:0.012 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site