lkml.org 
[lkml]   [2018]   [Feb]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
SubjectRe: [PATCH v3 2/5] x86/apic: Fix restoring boot irq mode in reboot and kexec/kdump
From
Date
Hi Baoquan,

At 02/12/2018 11:08 AM, Eric W. Biederman wrote:
> Baoquan He <bhe@redhat.com> writes:
>
>> This is a regression fix.
>>
>> Before, to fix erratum AVR31, commit 522e66464467 ("x86/apic: Disable
>> I/O APIC before shutdown of the local APIC") moved lapic_shutdown()
>> calling after disable_IO_APIC(). This introdued a regression. The
>> root cause is that disable_IO_APIC() not only clears IO_APIC, also
>> restore boot irq mode by setting LAPIC/APIC/IMCR, lapic_shutdown()
>> after disable_IO_APIC() will disable LAPIC and ruin the possible
>> virtual wire mode setting which the code has been trying to do all
>> along.
>>
>> The consequence is, in KVM guest kernel always prints warning as below
>> during kexec/kdump kernel boots up. That happened in setup_local_APIC()
>> since 'do { xxx } while (queued && max_loops > 0)' loop does not function

I am not sure another thing here

AFAIK, according to the order of SMP machine shutdown, other CPUs will
be stopped firstly, then the last CPU disable its local apic.

--machine_shutdown
|----......
|----stop_other_cpus()
|----local_shutdown()

So, the pending interrupts exist only in BSP and only be ACKed by
BSP. is it right?(I validated this by print the value of APIC_IRR/ISR of
all CPUs, found only BSP had the non-zero value).

If it is right, We will do not need check the pending interrupt for each
cpus.

BTW, the pending interrupt check code is mixed with the local
APIC setup code, that looks messy. How about extracting the code which
related to the crash interrupt check, put it into a new function and
only invoked it when the CPU is BSP?

diff --git a/arch/x86/kernel/apic/apic.c b/arch/x86/kernel/apic/apic.c
index 3fc259b4dd2d..0350528b320d 100644
--- a/arch/x86/kernel/apic/apic.c
+++ b/arch/x86/kernel/apic/apic.c
@@ -1408,6 +1408,57 @@ static void lapic_setup_esr(void)
oldvalue, value);
}

+
+static void clear_crash_pending_intr(void)
+{
+ long long max_loops = cpu_khz ? cpu_khz : 1000000;
+ unsigned long long tsc = 0, ntsc;
+ unsigned int value, queued;
+ int i, j, acked = 0;
+
+ if (boot_cpu_has(X86_FEATURE_TSC))
+ tsc = rdtsc();
+ /*
+ * After a crash, we no longer service the interrupts and a pending
+ * interrupt from previous kernel might still have ISR bit set.
+ *
+ * Most probably by now CPU has serviced that pending interrupt and
+ * it might not have done the ack_APIC_irq() because it thought,
+ * interrupt came from i8259 as ExtInt. LAPIC did not get EOI so it
+ * does not clear the ISR bit and cpu thinks it has already serivced
+ * the interrupt. Hence a vector might get locked. It was noticed
+ * for timer irq (vector 0x31). Issue an extra EOI to clear ISR.
+ */
+ do {
+ queued = 0;
+ for (i = APIC_ISR_NR - 1; i >= 0; i--)
+ queued |= apic_read(APIC_IRR + i*0x10);
+
+ for (i = APIC_ISR_NR - 1; i >= 0; i--) {
+ value = apic_read(APIC_ISR + i*0x10);
+ for (j = 31; j >= 0; j--) {
+ if (value & (1<<j)) {
+ ack_APIC_irq();
+ acked++;
+ }
+ }
+ }
+ if (acked > 256) {
+ printk(KERN_ERR "LAPIC pending interrupts after
%d EOI\n",
+ acked);
+ break;
+ }
+ if (queued) {
+ if (boot_cpu_has(X86_FEATURE_TSC) && cpu_khz) {
+ ntsc = rdtsc();
+ max_loops = (cpu_khz << 10) - (ntsc - tsc);
+ } else
+ max_loops--;
+ }
+ } while (queued && max_loops > 0);
+ WARN_ON(max_loops <= 0);
+}
+
/**
* setup_local_APIC - setup the local APIC
*
@@ -1417,13 +1468,7 @@ static void lapic_setup_esr(void)
void setup_local_APIC(void)
{
int cpu = smp_processor_id();
- unsigned int value, queued;
- int i, j, acked = 0;
- unsigned long long tsc = 0, ntsc;
- long long max_loops = cpu_khz ? cpu_khz : 1000000;
-
- if (boot_cpu_has(X86_FEATURE_TSC))
- tsc = rdtsc();
- tsc = rdtsc();
+ unsigned int value;

if (disable_apic) {
disable_ioapic_support();
@@ -1475,45 +1520,8 @@ void setup_local_APIC(void)
value &= ~APIC_TPRI_MASK;
apic_write(APIC_TASKPRI, value);

- /*
- * After a crash, we no longer service the interrupts and a pending
- * interrupt from previous kernel might still have ISR bit set.
- *
- * Most probably by now CPU has serviced that pending interrupt and
- * it might not have done the ack_APIC_irq() because it thought,
- * interrupt came from i8259 as ExtInt. LAPIC did not get EOI so it
- * does not clear the ISR bit and cpu thinks it has already serivced
- * the interrupt. Hence a vector might get locked. It was noticed
- * for timer irq (vector 0x31). Issue an extra EOI to clear ISR.
- */
- do {
- queued = 0;
- for (i = APIC_ISR_NR - 1; i >= 0; i--)
- queued |= apic_read(APIC_IRR + i*0x10);
-
- for (i = APIC_ISR_NR - 1; i >= 0; i--) {
- value = apic_read(APIC_ISR + i*0x10);
- for (j = 31; j >= 0; j--) {
- if (value & (1<<j)) {
- ack_APIC_irq();
- acked++;
- }
- }
- }
- if (acked > 256) {
- printk(KERN_ERR "LAPIC pending interrupts after
%d EOI\n",
- acked);
- break;
- }
- if (queued) {
- if (boot_cpu_has(X86_FEATURE_TSC) && cpu_khz) {
- ntsc = rdtsc();
- max_loops = (cpu_khz << 10) - (ntsc - tsc);
- } else
- max_loops--;
- }
- } while (queued && max_loops > 0);
- WARN_ON(max_loops <= 0);
+ if (!cpu)
+ clear_crash_pending_intr();

/*
* Now that we are all set up, enable the APIC

Thanks,
dou.

>> well any more if pending irq exists in APIC IRR after LAPIC is disabled.
>> And people even saw casual kdump kernel hang once in ~30 attempts during
>> stress testing of kdump on KVM machine.
>>
>> [ 0.001000] WARNING: CPU: 0 PID: 0 at arch/x86/kernel/apic/apic.c:1467 setup_local_APIC+0x228/0x330
>> [ 0.001000] Modules linked in:
>> [ 0.001000] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.15.0-rc5+ #3
>> [ 0.001000] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1.fc26 04/01/2014
>> [ 0.001000] RIP: 0010:setup_local_APIC+0x228/0x330
>> [ 0.001000] RSP: 0000:ffffffffb6e03eb8 EFLAGS: 00010286
>> [ 0.001000] RAX: 0000009edb4c4d84 RBX: 0000000000000000 RCX: 00000000b099d800
>> [ 0.001000] RDX: 0000009e00000000 RSI: 0000000000000000 RDI: 0000000000000810
>> [ 0.001000] RBP: 0000000000000000 R08: ffffffffffffffff R09: 0000000000000001
>> [ 0.001000] R10: ffff98ce6a801c00 R11: 0761076d072f0776 R12: 0000000000000001
>> [ 0.001000] R13: 00000000000000f0 R14: 0000000000004000 R15: ffffffffffffc6ff
>> [ 0.001000] FS: 0000000000000000(0000) GS:ffff98ce6bc00000(0000) knlGS:0000000000000000
>> [ 0.001000] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
>> [ 0.001000] CR2: 00000000ffffffff CR3: 0000000022209000 CR4: 00000000000406b0
>> [ 0.001000] Call Trace:
>> [ 0.001000] apic_bsp_setup+0x56/0x74
>> [ 0.001000] x86_late_time_init+0x11/0x16
>> [ 0.001000] start_kernel+0x3c9/0x486
>> [ 0.001000] secondary_startup_64+0xa5/0xb0
>> [ 0.001000] Code: 00 85 c9 74 2d 0f 31 c1 e1 0a 48 c1 e2 20 41 89 cf 4c 03 7c 24 08 48 09 d0 49 29 c7 4c 89 3c 24 48 83 3c 24 00 0f 8f 8f fe ff
>> ff <0f> ff e9 10 ff ff ff 48 83 2c 24 01 eb e7 48 83 c4 18 5b 5d 41
>> [ 0.001000] ---[ end trace b88e71b9a6ebebdd ]---
>> [ 0.001000] masked ExtINT on CPU#0
>>
>> To fix this, just break down disable_IO_APIC(), then call
>> clear_IO_APIC() to stop IO_APIC where disable_IO_APIC() was called,
>> and call restore_boot_irq_mode() to restore boot irq mode before
>> reboot or kexec/kdump jump.
>
> Two things here.
> a) This is missing a fixes tag and a CC stable.
> b) What makes your change to the KEXEC_JUMP code path safe?
> Have the lapic and ioapic already been shut down?
>
> The KEXEC_JUMP changes to machine_kexec_32.c and machine_kexec_64.c
> either need to be documented in the change long why they are safe
> so that this change becomes obviously safe and correct.
>
> Otherwise we risk and trivial and obvious looking change causing another
> regression like changing the order of lapic_shutdown and disable_IOAPIC
> did.
>
> Eric
>
>
>>
>> Signed-off-by: Baoquan He <bhe@redhat.com>
>> ---
>> arch/x86/include/asm/io_apic.h | 1 +
>> arch/x86/kernel/apic/io_apic.c | 2 +-
>> arch/x86/kernel/crash.c | 3 ++-
>> arch/x86/kernel/machine_kexec_32.c | 2 +-
>> arch/x86/kernel/machine_kexec_64.c | 2 +-
>> arch/x86/kernel/reboot.c | 3 ++-
>> 6 files changed, 8 insertions(+), 5 deletions(-)
>>
>> diff --git a/arch/x86/include/asm/io_apic.h b/arch/x86/include/asm/io_apic.h
>> index 558d1a6a13ad..0fa95bfacb39 100644
>> --- a/arch/x86/include/asm/io_apic.h
>> +++ b/arch/x86/include/asm/io_apic.h
>> @@ -193,6 +193,7 @@ static inline unsigned int io_apic_read(unsigned int apic, unsigned int reg)
>> extern void setup_IO_APIC(void);
>> extern void enable_IO_APIC(void);
>> extern void disable_IO_APIC(void);
>> +extern void clear_IO_APIC(void);
>> extern void restore_boot_irq_mode(void);
>> extern int IO_APIC_get_PCI_irq_vector(int bus, int devfn, int pin);
>> extern void print_IO_APICs(void);
>> diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c
>> index 7b73b6b9b4b6..2d7cd2db77f5 100644
>> --- a/arch/x86/kernel/apic/io_apic.c
>> +++ b/arch/x86/kernel/apic/io_apic.c
>> @@ -587,7 +587,7 @@ static void clear_IO_APIC_pin(unsigned int apic, unsigned int pin)
>> mpc_ioapic_id(apic), pin);
>> }
>>
>> -static void clear_IO_APIC (void)
>> +void clear_IO_APIC (void)
>> {
>> int apic, pin;
>>
>> diff --git a/arch/x86/kernel/crash.c b/arch/x86/kernel/crash.c
>> index 10e74d4778a1..1f6680427ff0 100644
>> --- a/arch/x86/kernel/crash.c
>> +++ b/arch/x86/kernel/crash.c
>> @@ -199,9 +199,10 @@ void native_machine_crash_shutdown(struct pt_regs *regs)
>> #ifdef CONFIG_X86_IO_APIC
>> /* Prevent crash_kexec() from deadlocking on ioapic_lock. */
>> ioapic_zap_locks();
>> - disable_IO_APIC();
>> + clear_IO_APIC();
>> #endif
>> lapic_shutdown();
>> + restore_boot_irq_mode();
>> #ifdef CONFIG_HPET_TIMER
>> hpet_disable();
>> #endif
>> diff --git a/arch/x86/kernel/machine_kexec_32.c b/arch/x86/kernel/machine_kexec_32.c
>> index edfede768688..f78bb4432bfb 100644
>> --- a/arch/x86/kernel/machine_kexec_32.c
>> +++ b/arch/x86/kernel/machine_kexec_32.c
>> @@ -199,7 +199,7 @@ void machine_kexec(struct kimage *image)
>> * one form or other. kexec jump path also need
>> * one.
>> */
>> - disable_IO_APIC();
>> + restore_boot_irq_mode();
>> #endif
>> }
>>
>> diff --git a/arch/x86/kernel/machine_kexec_64.c b/arch/x86/kernel/machine_kexec_64.c
>> index 1f790cf9d38f..cb0c2d0a4c99 100644
>> --- a/arch/x86/kernel/machine_kexec_64.c
>> +++ b/arch/x86/kernel/machine_kexec_64.c
>> @@ -297,7 +297,7 @@ void machine_kexec(struct kimage *image)
>> * one form or other. kexec jump path also need
>> * one.
>> */
>> - disable_IO_APIC();
>> + restore_boot_irq_mode();
>> #endif
>> }
>>
>> diff --git a/arch/x86/kernel/reboot.c b/arch/x86/kernel/reboot.c
>> index 2126b9d27c34..725624b6c0c0 100644
>> --- a/arch/x86/kernel/reboot.c
>> +++ b/arch/x86/kernel/reboot.c
>> @@ -666,7 +666,7 @@ void native_machine_shutdown(void)
>> * Even without the erratum, it still makes sense to quiet IO APIC
>> * before disabling Local APIC.
>> */
>> - disable_IO_APIC();
>> + clear_IO_APIC();
>> #endif
>>
>> #ifdef CONFIG_SMP
>> @@ -680,6 +680,7 @@ void native_machine_shutdown(void)
>> #endif
>>
>> lapic_shutdown();
>> + restore_boot_irq_mode();
>>
>> #ifdef CONFIG_HPET_TIMER
>> hpet_disable();
>
>
>


\
 
 \ /
  Last update: 2018-02-13 03:44    [W:3.363 / U:0.016 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site