lkml.org 
[lkml]   [2018]   [Dec]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [REPOST PATCH v6 0/4] kgdb: Fix kgdb_roundup_cpus()
Hi,

On Fri, Dec 7, 2018 at 9:42 AM Catalin Marinas <catalin.marinas@arm.com> wrote:
>
> On Tue, Dec 04, 2018 at 07:38:24PM -0800, Douglas Anderson wrote:
> > Douglas Anderson (4):
> > kgdb: Remove irq flags from roundup
> > kgdb: Fix kgdb_roundup_cpus() for arches who used smp_call_function()
> > kgdb: Don't round up a CPU that failed rounding up before
> > kdb: Don't back trace on a cpu that didn't round up
>
> FWIW, trying these on arm64 (ThunderX2) with CONFIG_KGDB_TESTS_ON_BOOT=y
> on top of 4.20-rc5 doesn't boot. It looks like they leave interrupts
> disabled when they shouldn't and it trips over the BUG at
> mm/vmalloc.c:1380 (called via do_fork -> copy_process).
>
> Now, I don't think these patches make things worse on arm64 since prior
> to them the kgdb boot tests on arm64 were stuck in a loop (RUN
> singlestep).

Thanks for the report! ...actually, I'd never tried CONFIG_KGDB_TESTS
before. ...so I tried them now:

A) chromeos-4.19 tree on qcom-sdm845 without this series: booted up OK
B) chromeos-4.19 tree on qcom-sdm845 with this series: booted up OK
C) v4.20-rc5-90-g30002dd008ed on rockchip-rk3399 (kevin) with this
series: booted up OK

Example output from B) above:

localhost ~ # dmesg | grep kgdbts
[ 2.139814] KGDB: Registered I/O driver kgdbts
[ 2.144582] kgdbts:RUN plant and detach test
[ 2.165333] kgdbts:RUN sw breakpoint test
[ 2.172990] kgdbts:RUN bad memory access test
[ 2.178640] kgdbts:RUN singlestep test 1000 iterations
[ 2.187765] kgdbts:RUN singlestep [0/1000]
[ 2.559596] kgdbts:RUN singlestep [100/1000]
[ 2.931419] kgdbts:RUN singlestep [200/1000]
[ 3.303474] kgdbts:RUN singlestep [300/1000]
[ 3.675121] kgdbts:RUN singlestep [400/1000]
[ 4.046867] kgdbts:RUN singlestep [500/1000]
[ 4.418920] kgdbts:RUN singlestep [600/1000]
[ 4.790824] kgdbts:RUN singlestep [700/1000]
[ 5.162479] kgdbts:RUN singlestep [800/1000]
[ 5.534103] kgdbts:RUN singlestep [900/1000]
[ 5.902299] kgdbts:RUN do_fork for 100 breakpoints
[ 8.463900] KGDB: Unregistered I/O driver kgdbts, debugger disabled

...so I guess I'm a little confused. Either I have a different config
than you do or something is special about your machine?


NOTE: In general I've never considered "single step" as reliable in
kgdb. I mostly use kgdb as "after the fact" crash debugging to
analyze local variables / memory / other tasks. If it worked that'd
actually be kinda great, but at least when I started using kgdb years
ago I learned that it didn't work and stopped trying...


-Doug

\
 
 \ /
  Last update: 2018-12-07 19:41    [W:0.144 / U:0.896 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site