lkml.org 
[lkml]   [2018]   [Dec]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH] irq: Request and release resources for chained IRQs
On Thu, Nov 29, 2018 at 2:31 PM Linus Walleij <linus.walleij@linaro.org> wrote:

> This addresses a bug in the irqchip core that was triggered
> by new code assuming a strict semantic order of the irqchip
> calls:
>
> .irq_request_resources()
> .irq_enable()
> .irq_disable()
> .irq_release_resources()
>
> Mostly this is working fine when handled inside manage.c,
> the calls are strictly happening in the above assumed order.
>
> However on a Qualcomm platform I get the following in dmesg:
>
> WARNING: CPU: 0 PID: 1 at ../drivers/gpio/gpiolib.c:3513
> gpiochip_irq_enable+0x18/0x44
> Modules linked in:
> CPU: 0 PID: 1 Comm: swapper/0
> Not tainted 4.20.0-rc4-00002-g1b8a75b25c6e-dirty #9
> Hardware name: Generic DT based system
> [<c03124ac>] (unwind_backtrace) from [<c030d994>] (show_stack+0x10/0x14)
> [<c030d994>] (show_stack) from [<c0b48aec>] (dump_stack+0x78/0x8c)
> [<c0b48aec>] (dump_stack) from [<c03213e4>] (__warn+0xe0/0xf8)
> [<c03213e4>] (__warn) from [<c0321514>] (warn_slowpath_null+0x40/0x48)
> [<c0321514>] (warn_slowpath_null) from [<c06ad5d0>]
> (gpiochip_irq_enable+0x18/0x44)
> [<c06ad5d0>] (gpiochip_irq_enable) from [<c0371198>] (irq_enable+0x44/0x64)
> [<c0371198>] (irq_enable) from [<c0371258>] (__irq_startup+0xa0/0xa8)
> [<c0371258>] (__irq_startup) from [<c03712ac>] (irq_startup+0x4c/0x130)
> [<c03712ac>] (irq_startup) from [<c03716d0>]
> (irq_set_chained_handler_and_data+0x4c/0x78)
> [<c03716d0>] (irq_set_chained_handler_and_data) from [<c081c17c>]
> (pm8xxx_probe+0x160/0x22c)
> [<c081c17c>] (pm8xxx_probe) from [<c07f439c>] (platform_drv_probe+0x48/0x98)
>
> What happens is that when the pm8xxx driver tries to register
> a chained IRQ irq_set_chained_handler_and_data() will eventually
> set the type and call irq_startup() and thus the .irq_enable()
> callback on the irqchip.
>
> This irqchip is in drivers/pinctrl/qcom/pinctrl-msm.c and known
> as TLMM.
>
> However, the irqchip core helpers in GPIO assumes that
> the .irq_request_resources() callback is always called before
> .irq_enable(), and the latter is where module refcount and
> also gpiochip_lock_as_irq() is normally called.
>
> When .irq_enable() is called without .irq_request_resources()
> having been called first, it seems like we are enabling
> an IRQ on a GPIO line that has not first been locked to be
> used as IRQ and we get the above warning. This happens since
> as of
> commit 461c1a7d4733d ("gpiolib: override irq_enable/disable")
> this is strictly assumed for all GPIO-based IRQs.
>
> As it seems reasonable to assume that .irq_request_resources()
> is always strictly called before .irq_enable(), we add the
> irq_[request|release]_resources() functions to the internal
> API and call them also when adding a chained irqchip to
> an IRQ.
>
> I am a bit uncertain about the call site for
> irq_released_resources() inside chip.c, but it appears this
> path is for uninstalling a chained handler.
>
> Cc: stable@vger.kernel.org
> Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
> Cc: Hans Verkuil <hverkuil@xs4all.nl>
> Fixes: 461c1a7d4733d ("gpiolib: override irq_enable/disable")
> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

IRQ folks: did you have time to look at this?

It's a very real regression for me.

Yours,
Linus Walleij

\
 
 \ /
  Last update: 2018-12-07 11:11    [W:0.056 / U:1.016 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site