lkml.org 
[lkml]   [2018]   [Dec]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH 2/7] microblaze: adjust the help to the real behavior
On Thu, Dec 6, 2018 at 9:54 PM Michal Simek <monstr@monstr.eu> wrote:
>
> On 06. 12. 18 6:27, Masahiro Yamada wrote:
> > Hi Michal,
> >
> > On Thu, Dec 6, 2018 at 12:41 AM Michal Simek <monstr@monstr.eu> wrote:
> >>
> >> On 03. 12. 18 8:50, Masahiro Yamada wrote:
> >>> "make ARCH=microblaze help" mentions simpleImage.<dt>.unstrip,
> >>> but it never works because Makefile assumes "system.unstrip" is
> >>> the name of DT.
> >>>
> >>> $ make ARCH=microblaze CROSS_COMPILE=microblaze-linux- simpleImage.system.unstrip
> >>> [ snip ]
> >>> make[1]: *** No rule to make target 'arch/microblaze/boot/dts/system.unstrip.dtb', needed by 'arch/microblaze/boot/dts/system.dtb'. Stop.
> >>> make: *** [Makefile;1060: arch/microblaze/boot/dts] Error 2
> >>> make: *** Waiting for unfinished jobs....
> >>>
> >>> Rip off the never-working target.
> >>>
> >>> In my understanding, simpleImage.<dt> works like a phony target that
> >>> generates multiple images. Reflect the behavior to the help message.
> >>>
> >>> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
> >>> ---
> >>>
> >>> arch/microblaze/Makefile | 4 +---
> >>> 1 file changed, 1 insertion(+), 3 deletions(-)
> >>>
> >>> diff --git a/arch/microblaze/Makefile b/arch/microblaze/Makefile
> >>> index 0823d29..97e1384 100644
> >>> --- a/arch/microblaze/Makefile
> >>> +++ b/arch/microblaze/Makefile
> >>> @@ -89,9 +89,7 @@ define archhelp
> >>> echo '* linux.bin - Create raw binary'
> >>> echo ' linux.bin.gz - Create compressed raw binary'
> >>> echo ' linux.bin.ub - Create U-Boot wrapped raw binary'
> >>> - echo ' simpleImage.<dt> - ELF image with $(arch)/boot/dts/<dt>.dts linked in'
> >>> - echo ' - stripped elf with fdt blob'
> >>> - echo ' simpleImage.<dt>.unstrip - full ELF image with fdt blob'
> >>> + echo ' simpleImage.<dt> - Create images with $(arch)/boot/dts/<dt>.dts linked in'
> >>> echo ' *_defconfig - Select default config from arch/microblaze/configs'
> >>> echo ''
> >>> echo ' Targets with <dt> embed a device tree blob inside the image'
> >>>
> >>
> >> I understand what you are trying to say but I would still like to keep
> >> information about unstrip file.
> >> It is correct that it is not build target. It is just generated file and
> >> message above was used for description what it is.
> >> Definitely agree that this should be the part of targets but it should
> >> be in description.
> >> The same is for missing description for simpleImage.<dt>.strip and
> >> simpleImage.<dt>.ub files.
> >>
> >> Thanks,
> >> Michal
> >>
> >
> > If we want to be precise to the current behavior,
> > we could describe more.
> > (Is it too much?)
> >
> >
> > Architecture specific targets (microblaze):
> > * linux.bin - Create raw binary
> > linux.bin.gz - Create compressed raw binary
> > linux.bin.ub - Create U-Boot wrapped raw binary
> > simpleImage.<dt> - Create the following images with
> > arch/macroblaze/boot/dts/<dt>.dts linked in
>
> type - microblaze
> maybe <dtb> here.
>
> > simpleImage.<dt> : raw image
> > simpleImage.<dt>.ub : raw image with U-Boot header
> > simpleImage.<dt>.unstrip: ELF (identical to vmlinux)
> > simpleImage.<dt>.strip : stripped ELF
> > *_defconfig - Select default config from arch/microblaze/configs
> >
> >
> >
> >
> > If you want to modify as you like,
> > I will not touch it though.
>
> what you have above is fine for me.


OK, I will send v2
with the typo fixed.

Thanks.




--
Best Regards
Masahiro Yamada

\
 
 \ /
  Last update: 2018-12-07 10:51    [W:0.049 / U:0.824 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site