lkml.org 
[lkml]   [2018]   [Dec]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH V3 rebase] mmc: sdhci: fix the timeout check window for clock and reset
On Thu, 6 Dec 2018 at 00:33, Du, Alek <alek.du@intel.com> wrote:
>
> From a081e783383adf1179c71bc37b4e199d087af643 Mon Sep 17 00:00:00 2001
> From: Alek Du <alek.du@intel.com>
> Date: Fri, 30 Nov 2018 14:02:28 +0800
> Subject: [PATCH] mmc: sdhci: fix the timeout check window for clock and reset
>
> We observed some premature timeouts on a virtualization platform, the log
> is like this:
>
> case 1:
> [159525.255629] mmc1: Internal clock never stabilised.
> [159525.255818] mmc1: sdhci: ============ SDHCI REGISTER DUMP ===========
> [159525.256049] mmc1: sdhci: Sys addr: 0x00000000 | Version: 0x00001002
> ...
> [159525.257205] mmc1: sdhci: Wake-up: 0x00000000 | Clock: 0x0000fa03
> From the clock control register dump, we are pretty sure the clock was
> stablized.
>
> case 2:
> [ 914.550127] mmc1: Reset 0x2 never completed.
> [ 914.550321] mmc1: sdhci: ============ SDHCI REGISTER DUMP ===========
> [ 914.550608] mmc1: sdhci: Sys addr: 0x00000010 | Version: 0x00001002
>
> After checking the sdhci code, we found the timeout check actually has a
> little window that the CPU can be scheduled out and when it comes back,
> the original time set or check is not valid.
>
> Fixes: 5a436cc0af62 ("mmc: sdhci: Optimize delay loops")
> Cc: stable@vger.kernel.org # v4.12+
> Signed-off-by: Alek Du <alek.du@intel.com>

I am still not able to apply this, however the reason is not that a
rebase is needed.

Instead it seems like the patch is malformed, exactly why I don't
know. I am using patchwork to fetch the patch, but I even tried
fetching it directly via my gmail client, no luck. In both case it
can't be applied and checkpatch is also complaining.

Could you check at your side and see what can be wrong? If there is
too much hazzle I can manually fixup the patch next week, as one time
thing.

Kind regards
Uffe

> ---
> drivers/mmc/host/sdhci.c | 18 +++++++++++++-----
> 1 file changed, 13 insertions(+), 5 deletions(-)
>
> diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
> index 99bdae53fa2e..451b08a818a9 100644
> --- a/drivers/mmc/host/sdhci.c
> +++ b/drivers/mmc/host/sdhci.c
> @@ -216,8 +216,12 @@ void sdhci_reset(struct sdhci_host *host, u8 mask)
> timeout = ktime_add_ms(ktime_get(), 100);
>
> /* hw clears the bit when it's done */
> - while (sdhci_readb(host, SDHCI_SOFTWARE_RESET) & mask) {
> - if (ktime_after(ktime_get(), timeout)) {
> + while (1) {
> + bool timedout = ktime_after(ktime_get(), timeout);
> +
> + if (!(sdhci_readb(host, SDHCI_SOFTWARE_RESET) & mask))
> + break;
> + if (timedout) {
> pr_err("%s: Reset 0x%x never completed.\n",
> mmc_hostname(host->mmc), (int)mask);
> sdhci_dumpregs(host);
> @@ -1608,9 +1612,13 @@ void sdhci_enable_clk(struct sdhci_host *host, u16 clk)
>
> /* Wait max 20 ms */
> timeout = ktime_add_ms(ktime_get(), 20);
> - while (!((clk = sdhci_readw(host, SDHCI_CLOCK_CONTROL))
> - & SDHCI_CLOCK_INT_STABLE)) {
> - if (ktime_after(ktime_get(), timeout)) {
> + while (1) {
> + bool timedout = ktime_after(ktime_get(), timeout);
> +
> + clk = sdhci_readw(host, SDHCI_CLOCK_CONTROL);
> + if (clk & SDHCI_CLOCK_INT_STABLE)
> + break;
> + if (timedout) {
> pr_err("%s: Internal clock never stabilised.\n",
> mmc_hostname(host->mmc));
> sdhci_dumpregs(host);
> --
> 2.17.1

\
 
 \ /
  Last update: 2018-12-06 08:56    [W:0.055 / U:0.156 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site