lkml.org 
[lkml]   [2018]   [Dec]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 3/5] clk: mvebu: ap806: Fix clock name for the cluster
Date
Actually, the clocks exposed for the cluster are not the CPU clocks, but
the PLL clock used as entry clock for the CPU clocks. The CPU clock will
be managed by a driver submitting in the following patches.

Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
---
drivers/clk/mvebu/ap806-system-controller.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/clk/mvebu/ap806-system-controller.c b/drivers/clk/mvebu/ap806-system-controller.c
index 0a58824ff053..73ba8fd7860f 100644
--- a/drivers/clk/mvebu/ap806-system-controller.c
+++ b/drivers/clk/mvebu/ap806-system-controller.c
@@ -97,7 +97,7 @@ static int ap806_syscon_common_probe(struct platform_device *pdev,
cpuclk_freq *= 1000 * 1000;

/* CPU clocks depend on the Sample At Reset configuration */
- name = ap_cp_unique_name(dev, syscon_node, "cpu-cluster-0");
+ name = ap_cp_unique_name(dev, syscon_node, "pll-cluster-0");
ap806_clks[0] = clk_register_fixed_rate(dev, name, NULL,
0, cpuclk_freq);
if (IS_ERR(ap806_clks[0])) {
@@ -105,7 +105,7 @@ static int ap806_syscon_common_probe(struct platform_device *pdev,
goto fail0;
}

- name = ap_cp_unique_name(dev, syscon_node, "cpu-cluster-1");
+ name = ap_cp_unique_name(dev, syscon_node, "pll-cluster-1");
ap806_clks[1] = clk_register_fixed_rate(dev, name, NULL, 0,
cpuclk_freq);
if (IS_ERR(ap806_clks[1])) {
--
2.19.2
\
 
 \ /
  Last update: 2018-12-06 18:17    [W:0.031 / U:0.748 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site