lkml.org 
[lkml]   [2018]   [Dec]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH 1/2] arm64: dts: rockchip: rockpro64 fix regulator gpios
Date
Am Samstag, 1. Dezember 2018, 11:08:16 CET schrieb Oskari Lemmela:
> Rockpro64 is not able boot if GPIO1_C1 pin is pulled high
> before loading linux kernel.
>
> In rockpro64 GPIO1_C1 pin is connected vdd_cpu_b regulator
> VSEL pin. Pin should be pulled down in normal operation and
> pulled high in suspend.
>
> PMIC LDO_REG2 is connected to touch panel connector.
> Rename regulator and set it to correct voltage.
>
> PCIe power is controller by GPIO1_D0.
>
> Schematics can be downloaded from:
> http://files.pine64.org/doc/rockpro64/rockpro64_v21-SCH.pdf
>
> Signed-off-by: Oskari Lemmela <oskari@lemmela.net>

applied as fix for 4.20

Thanks
Heiko


\
 
 \ /
  Last update: 2018-12-06 13:48    [W:0.048 / U:5.392 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site