lkml.org 
[lkml]   [2018]   [Dec]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 2/2] staging: iio: adc: ad7192: Add clock output option
Date
When using the internal clock the device has an option in which the clock
output is available on MCLK2 pin. This patch adds a dt binding for enabling
this property.

Signed-off-by: Mircea Caprioru <mircea.caprioru@analog.com>
---
drivers/staging/iio/adc/ad7192.c | 9 ++++++++-
1 file changed, 8 insertions(+), 1 deletion(-)

diff --git a/drivers/staging/iio/adc/ad7192.c b/drivers/staging/iio/adc/ad7192.c
index 8a4e6ede42b3..a11c8a82bb7c 100644
--- a/drivers/staging/iio/adc/ad7192.c
+++ b/drivers/staging/iio/adc/ad7192.c
@@ -611,6 +611,10 @@ static const struct iio_chan_spec ad7193_channels[] = {
static int ad7192_clock_select(struct spi_device *spi, struct ad7192_state *st)
{
int ret;
+ bool clock_out_en;
+
+ clock_out_en = of_property_read_bool(spi->dev.of_node,
+ "adi,int-clock-output-enable");

st->clock_sel = AD7192_CLK_EXT_MCLK2;
st->mclk = devm_clk_get(&spi->dev, "clk");
@@ -626,7 +630,10 @@ static int ad7192_clock_select(struct spi_device *spi, struct ad7192_state *st)
return PTR_ERR(st->mclk);

/* use internal clock */
- st->clock_sel = AD7192_CLK_INT;
+ if (!clock_out_en)
+ st->clock_sel = AD7192_CLK_INT;
+ else
+ st->clock_sel = AD7192_CLK_INT_CO;
st->fclk = AD7192_INT_FREQ_MHZ;
}
}
--
2.17.1
\
 
 \ /
  Last update: 2018-12-06 10:12    [W:0.088 / U:28.664 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site