lkml.org 
[lkml]   [2018]   [Dec]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2] power: supply: sc27xx: Save last battery capacity
Hi,

On Thu, Dec 06, 2018 at 11:20:39AM +0800, Baolin Wang wrote:
> From: Yuanjiang Yu <yuanjiang.yu@unisoc.com>
>
> Our charger manager can optimize the battery capacity periodically, so
> we can save last battery capacity into registers. Then next system
> power-on, we can read the last saved battery capacity as the initial
> battery capacity, which can make the battery capacity more accurate.
>
> Signed-off-by: Yuanjiang Yu <yuanjiang.yu@unisoc.com>
> Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
> ---

Thanks, queued.

-- Sebastian

> Changes from v1:
> - Simplify the logics for sc27xx_fgu_set_property() and
> sc27xx_fgu_property_is_writeable().
> ---
> drivers/power/supply/sc27xx_fuel_gauge.c | 135 +++++++++++++++++++++++++++++-
> 1 file changed, 134 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/power/supply/sc27xx_fuel_gauge.c b/drivers/power/supply/sc27xx_fuel_gauge.c
> index 8c52e29..76da189 100644
> --- a/drivers/power/supply/sc27xx_fuel_gauge.c
> +++ b/drivers/power/supply/sc27xx_fuel_gauge.c
> @@ -39,6 +39,9 @@
> #define SC27XX_FGU_CLBCNT_VALH 0x68
> #define SC27XX_FGU_CLBCNT_VALL 0x6c
> #define SC27XX_FGU_CLBCNT_QMAXL 0x74
> +#define SC27XX_FGU_USER_AREA_SET 0xa0
> +#define SC27XX_FGU_USER_AREA_CLEAR 0xa4
> +#define SC27XX_FGU_USER_AREA_STATUS 0xa8
>
> #define SC27XX_WRITE_SELCLB_EN BIT(0)
> #define SC27XX_FGU_CLBCNT_MASK GENMASK(15, 0)
> @@ -49,6 +52,14 @@
> #define SC27XX_FGU_LOW_OVERLOAD_INT BIT(0)
> #define SC27XX_FGU_CLBCNT_DELTA_INT BIT(2)
>
> +#define SC27XX_FGU_MODE_AREA_MASK GENMASK(15, 12)
> +#define SC27XX_FGU_CAP_AREA_MASK GENMASK(11, 0)
> +#define SC27XX_FGU_MODE_AREA_SHIFT 12
> +
> +#define SC27XX_FGU_FIRST_POWERTON GENMASK(3, 0)
> +#define SC27XX_FGU_DEFAULT_CAP GENMASK(11, 0)
> +#define SC27XX_FGU_NORMAIL_POWERTON 0x5
> +
> #define SC27XX_FGU_CUR_BASIC_ADC 8192
> #define SC27XX_FGU_SAMPLE_HZ 2
>
> @@ -119,6 +130,80 @@ static int sc27xx_fgu_voltage_to_adc(struct sc27xx_fgu_data *data, int vol)
> return DIV_ROUND_CLOSEST(vol * data->vol_1000mv_adc, 1000);
> }
>
> +static bool sc27xx_fgu_is_first_poweron(struct sc27xx_fgu_data *data)
> +{
> + int ret, status, cap, mode;
> +
> + ret = regmap_read(data->regmap,
> + data->base + SC27XX_FGU_USER_AREA_STATUS, &status);
> + if (ret)
> + return false;
> +
> + /*
> + * We use low 4 bits to save the last battery capacity and high 12 bits
> + * to save the system boot mode.
> + */
> + mode = (status & SC27XX_FGU_MODE_AREA_MASK) >> SC27XX_FGU_MODE_AREA_SHIFT;
> + cap = status & SC27XX_FGU_CAP_AREA_MASK;
> +
> + /*
> + * When FGU has been powered down, the user area registers became
> + * default value (0xffff), which can be used to valid if the system is
> + * first power on or not.
> + */
> + if (mode == SC27XX_FGU_FIRST_POWERTON || cap == SC27XX_FGU_DEFAULT_CAP)
> + return true;
> +
> + return false;
> +}
> +
> +static int sc27xx_fgu_save_boot_mode(struct sc27xx_fgu_data *data,
> + int boot_mode)
> +{
> + int ret;
> +
> + ret = regmap_update_bits(data->regmap,
> + data->base + SC27XX_FGU_USER_AREA_CLEAR,
> + SC27XX_FGU_MODE_AREA_MASK,
> + SC27XX_FGU_MODE_AREA_MASK);
> + if (ret)
> + return ret;
> +
> + return regmap_update_bits(data->regmap,
> + data->base + SC27XX_FGU_USER_AREA_SET,
> + SC27XX_FGU_MODE_AREA_MASK,
> + boot_mode << SC27XX_FGU_MODE_AREA_SHIFT);
> +}
> +
> +static int sc27xx_fgu_save_last_cap(struct sc27xx_fgu_data *data, int cap)
> +{
> + int ret;
> +
> + ret = regmap_update_bits(data->regmap,
> + data->base + SC27XX_FGU_USER_AREA_CLEAR,
> + SC27XX_FGU_CAP_AREA_MASK,
> + SC27XX_FGU_CAP_AREA_MASK);
> + if (ret)
> + return ret;
> +
> + return regmap_update_bits(data->regmap,
> + data->base + SC27XX_FGU_USER_AREA_SET,
> + SC27XX_FGU_CAP_AREA_MASK, cap);
> +}
> +
> +static int sc27xx_fgu_read_last_cap(struct sc27xx_fgu_data *data, int *cap)
> +{
> + int ret, value;
> +
> + ret = regmap_read(data->regmap,
> + data->base + SC27XX_FGU_USER_AREA_STATUS, &value);
> + if (ret)
> + return ret;
> +
> + *cap = value & SC27XX_FGU_CAP_AREA_MASK;
> + return 0;
> +}
> +
> /*
> * When system boots on, we can not read battery capacity from coulomb
> * registers, since now the coulomb registers are invalid. So we should
> @@ -128,6 +213,20 @@ static int sc27xx_fgu_voltage_to_adc(struct sc27xx_fgu_data *data, int vol)
> static int sc27xx_fgu_get_boot_capacity(struct sc27xx_fgu_data *data, int *cap)
> {
> int volt, cur, oci, ocv, ret;
> + bool is_first_poweron = sc27xx_fgu_is_first_poweron(data);
> +
> + /*
> + * If system is not the first power on, we should use the last saved
> + * battery capacity as the initial battery capacity. Otherwise we should
> + * re-calculate the initial battery capacity.
> + */
> + if (!is_first_poweron) {
> + ret = sc27xx_fgu_read_last_cap(data, cap);
> + if (ret)
> + return ret;
> +
> + return sc27xx_fgu_save_boot_mode(data, SC27XX_FGU_NORMAIL_POWERTON);
> + }
>
> /*
> * After system booting on, the SC27XX_FGU_CLBCNT_QMAXL register saved
> @@ -160,7 +259,11 @@ static int sc27xx_fgu_get_boot_capacity(struct sc27xx_fgu_data *data, int *cap)
> *cap = power_supply_ocv2cap_simple(data->cap_table, data->table_len,
> ocv);
>
> - return 0;
> + ret = sc27xx_fgu_save_last_cap(data, *cap);
> + if (ret)
> + return ret;
> +
> + return sc27xx_fgu_save_boot_mode(data, SC27XX_FGU_NORMAIL_POWERTON);
> }
>
> static int sc27xx_fgu_set_clbcnt(struct sc27xx_fgu_data *data, int clbcnt)
> @@ -418,6 +521,28 @@ static int sc27xx_fgu_get_property(struct power_supply *psy,
> return ret;
> }
>
> +static int sc27xx_fgu_set_property(struct power_supply *psy,
> + enum power_supply_property psp,
> + const union power_supply_propval *val)
> +{
> + struct sc27xx_fgu_data *data = power_supply_get_drvdata(psy);
> + int ret;
> +
> + if (psp != POWER_SUPPLY_PROP_CAPACITY)
> + return -EINVAL;
> +
> + mutex_lock(&data->lock);
> +
> + ret = sc27xx_fgu_save_last_cap(data, val->intval);
> +
> + mutex_unlock(&data->lock);
> +
> + if (ret < 0)
> + dev_err(data->dev, "failed to save battery capacity\n");
> +
> + return ret;
> +}
> +
> static void sc27xx_fgu_external_power_changed(struct power_supply *psy)
> {
> struct sc27xx_fgu_data *data = power_supply_get_drvdata(psy);
> @@ -425,6 +550,12 @@ static void sc27xx_fgu_external_power_changed(struct power_supply *psy)
> power_supply_changed(data->battery);
> }
>
> +static int sc27xx_fgu_property_is_writeable(struct power_supply *psy,
> + enum power_supply_property psp)
> +{
> + return psp == POWER_SUPPLY_PROP_CAPACITY;
> +}
> +
> static enum power_supply_property sc27xx_fgu_props[] = {
> POWER_SUPPLY_PROP_STATUS,
> POWER_SUPPLY_PROP_HEALTH,
> @@ -444,7 +575,9 @@ static void sc27xx_fgu_external_power_changed(struct power_supply *psy)
> .properties = sc27xx_fgu_props,
> .num_properties = ARRAY_SIZE(sc27xx_fgu_props),
> .get_property = sc27xx_fgu_get_property,
> + .set_property = sc27xx_fgu_set_property,
> .external_power_changed = sc27xx_fgu_external_power_changed,
> + .property_is_writeable = sc27xx_fgu_property_is_writeable,
> };
>
> static void sc27xx_fgu_adjust_cap(struct sc27xx_fgu_data *data, int cap)
> --
> 1.7.9.5
>
[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2018-12-06 22:59    [W:0.065 / U:0.236 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site