lkml.org 
[lkml]   [2018]   [Dec]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH 10/14] dt-bindings: pinctrl: milbeaut: Add Milbeaut M10V pinctrl description
From
Date
Hi,

Thank you for your comments.

On 2018/12/05 8:11, Rob Herring wrote:
> On Mon, Nov 19, 2018 at 10:02:12AM +0900, Sugaya Taichi wrote:
>> Add DT bindings document for Milbeaut M10V pinctrl.
>>
>> Signed-off-by: Sugaya Taichi <sugaya.taichi@socionext.com>
>> ---
>> .../pinctrl/socionext,milbeaut-pinctrl.txt | 33 ++++++++++++++++++++++
>> 1 file changed, 33 insertions(+)
>> create mode 100644 Documentation/devicetree/bindings/pinctrl/socionext,milbeaut-pinctrl.txt
>>
>> diff --git a/Documentation/devicetree/bindings/pinctrl/socionext,milbeaut-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/socionext,milbeaut-pinctrl.txt
>> new file mode 100644
>> index 0000000..7469189
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/pinctrl/socionext,milbeaut-pinctrl.txt
>> @@ -0,0 +1,33 @@
>> +Milbeaut SoCs pin controller
>> +
>> +Required properties:
>> +- compatible: should be one of the following:
>> + "socionext,milbeaut-m10v-pinctrl" - for m10v SoC
>> +- reg: offset and length of the register set.
>> +- reg-names: should be "pinctrl", "exiu".
>> +- gpio-cells; should be 2.
>
> #gpio-cells
>
> gpio-controller?

Ah yes. I forgot to add it.
Add it.

>
>> +- interrupt-cells: should be 2.
>
> #interrupt-cells
>
> interrupt-controller?

Add it also.

Thanks,
Sugaya Taichi

>
>> +- clocks: phandle to the input clock.
>> +- interrupts: three interrupts specifer.
>> +- interrupt-names: corresponds "interrupts" factor.
>> +
>> +Example:
>> + pinctrl: pinctrl@1d022000 {
>> + compatible = "socionext,milbeaut-m10v-pinctrl";
>> + reg = <0x1d022000 0x1000>,
>> + <0x1c26f000 0x1000>;
>> + reg-names = "pinctrl", "exiu";
>> + gpio-controller;
>> + #gpio-cells = <2>;
>> + interrupt-controller;
>> + #interrupt-cells = <2>;
>> + clocks = <&dummy_clk>;
>> + interrupts = <0 54 4>, <0 55 4>, <0 56 4>, <0 57 4>,
>> + <0 58 4>, <0 59 4>, <0 60 4>, <0 61 4>,
>> + <0 62 4>, <0 63 4>, <0 64 4>, <0 65 4>,
>> + <0 66 4>, <0 67 4>, <0 68 4>, <0 69 4>;
>> + interrupt-names = "pin-48", "pin-49", "pin-50", "pin-51",
>> + "pin-52", "pin-53", "pin-54", "pin-55",
>> + "pin-56", "pin-57", "pin-58", "pin-59",
>> + "pin-60", "pin-61", "pin-62", "pin-63";
>> + }
>> --
>> 1.9.1
>>

\
 
 \ /
  Last update: 2018-12-06 09:31    [W:0.891 / U:0.036 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site