lkml.org 
[lkml]   [2018]   [Dec]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 06/13] hwmon: (ltc4260) Auto-convert to use SENSOR_DEVICE_ATTR_{RO, RW, WO}
Date
Conversion was done done using the coccinelle script at
https://github.com/groeck/coccinelle-patches/raw/master/hwmon/sensor-devattr-w6.cocci

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
---
drivers/hwmon/ltc4260.c | 26 ++++++++++----------------
1 file changed, 10 insertions(+), 16 deletions(-)

diff --git a/drivers/hwmon/ltc4260.c b/drivers/hwmon/ltc4260.c
index afb09574b12c..011b1ae98ff1 100644
--- a/drivers/hwmon/ltc4260.c
+++ b/drivers/hwmon/ltc4260.c
@@ -79,7 +79,7 @@ static int ltc4260_get_value(struct device *dev, u8 reg)
return val;
}

-static ssize_t ltc4260_show_value(struct device *dev,
+static ssize_t ltc4260_value_show(struct device *dev,
struct device_attribute *da, char *buf)
{
struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
@@ -91,7 +91,7 @@ static ssize_t ltc4260_show_value(struct device *dev,
return snprintf(buf, PAGE_SIZE, "%d\n", value);
}

-static ssize_t ltc4260_show_bool(struct device *dev,
+static ssize_t ltc4260_bool_show(struct device *dev,
struct device_attribute *da, char *buf)
{
struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
@@ -111,30 +111,24 @@ static ssize_t ltc4260_show_bool(struct device *dev,
}

/* Voltages */
-static SENSOR_DEVICE_ATTR(in1_input, S_IRUGO, ltc4260_show_value, NULL,
- LTC4260_SOURCE);
-static SENSOR_DEVICE_ATTR(in2_input, S_IRUGO, ltc4260_show_value, NULL,
- LTC4260_ADIN);
+static SENSOR_DEVICE_ATTR_RO(in1_input, ltc4260_value, LTC4260_SOURCE);
+static SENSOR_DEVICE_ATTR_RO(in2_input, ltc4260_value, LTC4260_ADIN);

/*
* Voltage alarms
* UV/OV faults are associated with the input voltage, and the POWER BAD and
* FET SHORT faults are associated with the output voltage.
*/
-static SENSOR_DEVICE_ATTR(in1_min_alarm, S_IRUGO, ltc4260_show_bool, NULL,
- FAULT_UV);
-static SENSOR_DEVICE_ATTR(in1_max_alarm, S_IRUGO, ltc4260_show_bool, NULL,
- FAULT_OV);
-static SENSOR_DEVICE_ATTR(in2_alarm, S_IRUGO, ltc4260_show_bool, NULL,
- FAULT_POWER_BAD | FAULT_FET_SHORT);
+static SENSOR_DEVICE_ATTR_RO(in1_min_alarm, ltc4260_bool, FAULT_UV);
+static SENSOR_DEVICE_ATTR_RO(in1_max_alarm, ltc4260_bool, FAULT_OV);
+static SENSOR_DEVICE_ATTR_RO(in2_alarm, ltc4260_bool,
+ FAULT_POWER_BAD | FAULT_FET_SHORT);

/* Current (via sense resistor) */
-static SENSOR_DEVICE_ATTR(curr1_input, S_IRUGO, ltc4260_show_value, NULL,
- LTC4260_SENSE);
+static SENSOR_DEVICE_ATTR_RO(curr1_input, ltc4260_value, LTC4260_SENSE);

/* Overcurrent alarm */
-static SENSOR_DEVICE_ATTR(curr1_max_alarm, S_IRUGO, ltc4260_show_bool, NULL,
- FAULT_OC);
+static SENSOR_DEVICE_ATTR_RO(curr1_max_alarm, ltc4260_bool, FAULT_OC);

static struct attribute *ltc4260_attrs[] = {
&sensor_dev_attr_in1_input.dev_attr.attr,
--
2.7.4
\
 
 \ /
  Last update: 2018-12-06 20:24    [W:0.066 / U:0.568 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site