lkml.org 
[lkml]   [2018]   [Dec]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v4 3/3] iommu/io-pgtable-arm-v7s: Request DMA32 memory, and improve debugging
From
Date
On 12/5/18 6:48 AM, Nicolas Boichat wrote:
> IOMMUs using ARMv7 short-descriptor format require page tables
> (level 1 and 2) to be allocated within the first 4GB of RAM, even
> on 64-bit systems.
>
> For level 1/2 pages, ensure GFP_DMA32 is used if CONFIG_ZONE_DMA32
> is defined (e.g. on arm64 platforms).
>
> For level 2 pages, allocate a slab cache in SLAB_CACHE_DMA32.
>
> Also, print an error when the physical address does not fit in
> 32-bit, to make debugging easier in the future.
>
> Fixes: ad67f5a6545f ("arm64: replace ZONE_DMA with ZONE_DMA32")
> Signed-off-by: Nicolas Boichat <drinkcat@chromium.org>
> ---
>
> Changes since v2:
> - Commit message
>
> (v3 used the page_frag approach)
>
> drivers/iommu/io-pgtable-arm-v7s.c | 20 ++++++++++++++++----
> 1 file changed, 16 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/iommu/io-pgtable-arm-v7s.c b/drivers/iommu/io-pgtable-arm-v7s.c
> index 445c3bde04800c..996f7b6d00b44a 100644
> --- a/drivers/iommu/io-pgtable-arm-v7s.c
> +++ b/drivers/iommu/io-pgtable-arm-v7s.c
> @@ -161,6 +161,14 @@
>
> #define ARM_V7S_TCR_PD1 BIT(5)
>
> +#ifdef CONFIG_ZONE_DMA32
> +#define ARM_V7S_TABLE_GFP_DMA GFP_DMA32
> +#define ARM_V7S_TABLE_SLAB_CACHE SLAB_CACHE_DMA32
> +#else
> +#define ARM_V7S_TABLE_GFP_DMA GFP_DMA
> +#define ARM_V7S_TABLE_SLAB_CACHE SLAB_CACHE_DMA
> +#endif
> +
> typedef u32 arm_v7s_iopte;
>
> static bool selftest_running;
> @@ -198,13 +206,17 @@ static void *__arm_v7s_alloc_table(int lvl, gfp_t gfp,
> void *table = NULL;
>
> if (lvl == 1)
> - table = (void *)__get_dma_pages(__GFP_ZERO, get_order(size));
> + table = (void *)__get_free_pages(
> + __GFP_ZERO | ARM_V7S_TABLE_GFP_DMA, get_order(size));
> else if (lvl == 2)
> - table = kmem_cache_zalloc(data->l2_tables, gfp | GFP_DMA);
> + table = kmem_cache_zalloc(data->l2_tables,
> + gfp | ARM_V7S_TABLE_GFP_DMA);

So as I've explained in 2/3, you don't need ARM_V7S_TABLE_GFP_DMA here
(and then you don't need to adjust the slab warnings).

> phys = virt_to_phys(table);
> - if (phys != (arm_v7s_iopte)phys)
> + if (phys != (arm_v7s_iopte)phys) {
> /* Doesn't fit in PTE */
> + dev_err(dev, "Page table does not fit in PTE: %pa", &phys);
> goto out_free;
> + }
> if (table && !(cfg->quirks & IO_PGTABLE_QUIRK_NO_DMA)) {
> dma = dma_map_single(dev, table, size, DMA_TO_DEVICE);
> if (dma_mapping_error(dev, dma))
> @@ -737,7 +749,7 @@ static struct io_pgtable *arm_v7s_alloc_pgtable(struct io_pgtable_cfg *cfg,
> data->l2_tables = kmem_cache_create("io-pgtable_armv7s_l2",
> ARM_V7S_TABLE_SIZE(2),
> ARM_V7S_TABLE_SIZE(2),
> - SLAB_CACHE_DMA, NULL);
> + ARM_V7S_TABLE_SLAB_CACHE, NULL);
> if (!data->l2_tables)
> goto out_free_data;
>
>

\
 
 \ /
  Last update: 2018-12-05 15:47    [W:0.404 / U:0.036 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site