lkml.org 
[lkml]   [2018]   [Dec]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Subject[GIT PULL] SCSI fixes for 4.20-rc5
From
Date
Four obvious bug fixes.  The vmw_pscsi one is so old that it's amazing
no-one noticed before now.

The patch is available here:

git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi.git scsi-fixes

The short changelog is:

Cathy Avery (1):
scsi: vmw_pscsi: Rearrange code to avoid multiple calls to free_irq during unload

Dexuan Cui (1):
scsi: storvsc: Fix a race in sub-channel creation that can cause panic

Fred Herard (1):
scsi: libiscsi: Fix NULL pointer dereference in iscsi_eh_session_reset

Martin Wilck (1):
scsi: lpfc: fix block guard enablement on SLI3 adapters

And the diffstat:

drivers/scsi/libiscsi.c | 4 +--
drivers/scsi/lpfc/lpfc_init.c | 6 ++++-
drivers/scsi/lpfc/lpfc_sli.c | 1 -
drivers/scsi/storvsc_drv.c | 61 +++++++++++++++++++++----------------------
drivers/scsi/vmw_pvscsi.c | 4 +--
5 files changed, 39 insertions(+), 37 deletions(-)

With full diff below.

James

---

diff --git a/drivers/scsi/libiscsi.c b/drivers/scsi/libiscsi.c
index 93c66ebad907..f78d2e5c1471 100644
--- a/drivers/scsi/libiscsi.c
+++ b/drivers/scsi/libiscsi.c
@@ -2416,8 +2416,8 @@ int iscsi_eh_session_reset(struct scsi_cmnd *sc)
failed:
ISCSI_DBG_EH(session,
"failing session reset: Could not log back into "
- "%s, %s [age %d]\n", session->targetname,
- conn->persistent_address, session->age);
+ "%s [age %d]\n", session->targetname,
+ session->age);
spin_unlock_bh(&session->frwd_lock);
mutex_unlock(&session->eh_mutex);
return FAILED;
diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c
index 20fa6785a0e2..68d62d55a3a5 100644
--- a/drivers/scsi/lpfc/lpfc_init.c
+++ b/drivers/scsi/lpfc/lpfc_init.c
@@ -167,7 +167,11 @@ lpfc_config_port_prep(struct lpfc_hba *phba)
sizeof(phba->wwpn));
}

- phba->sli3_options = 0x0;
+ /*
+ * Clear all option bits except LPFC_SLI3_BG_ENABLED,
+ * which was already set in lpfc_get_cfgparam()
+ */
+ phba->sli3_options &= (uint32_t)LPFC_SLI3_BG_ENABLED;

/* Setup and issue mailbox READ REV command */
lpfc_read_rev(phba, pmb);
diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c
index 783a1540cfbe..b9e5cd79931a 100644
--- a/drivers/scsi/lpfc/lpfc_sli.c
+++ b/drivers/scsi/lpfc/lpfc_sli.c
@@ -4965,7 +4965,6 @@ lpfc_sli_config_port(struct lpfc_hba *phba, int sli_mode)
phba->sli3_options &= ~(LPFC_SLI3_NPIV_ENABLED |
LPFC_SLI3_HBQ_ENABLED |
LPFC_SLI3_CRP_ENABLED |
- LPFC_SLI3_BG_ENABLED |
LPFC_SLI3_DSS_ENABLED);
if (rc != MBX_SUCCESS) {
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
diff --git a/drivers/scsi/storvsc_drv.c b/drivers/scsi/storvsc_drv.c
index f03dc03a42c3..8f88348ebe42 100644
--- a/drivers/scsi/storvsc_drv.c
+++ b/drivers/scsi/storvsc_drv.c
@@ -446,7 +446,6 @@ struct storvsc_device {

bool destroy;
bool drain_notify;
- bool open_sub_channel;
atomic_t num_outstanding_req;
struct Scsi_Host *host;

@@ -636,33 +635,38 @@ static inline struct storvsc_device *get_in_stor_device(
static void handle_sc_creation(struct vmbus_channel *new_sc)
{
struct hv_device *device = new_sc->primary_channel->device_obj;
+ struct device *dev = &device->device;
struct storvsc_device *stor_device;
struct vmstorage_channel_properties props;
+ int ret;

stor_device = get_out_stor_device(device);
if (!stor_device)
return;

- if (stor_device->open_sub_channel == false)
- return;
-
memset(&props, 0, sizeof(struct vmstorage_channel_properties));

- vmbus_open(new_sc,
- storvsc_ringbuffer_size,
- storvsc_ringbuffer_size,
- (void *)&props,
- sizeof(struct vmstorage_channel_properties),
- storvsc_on_channel_callback, new_sc);
+ ret = vmbus_open(new_sc,
+ storvsc_ringbuffer_size,
+ storvsc_ringbuffer_size,
+ (void *)&props,
+ sizeof(struct vmstorage_channel_properties),
+ storvsc_on_channel_callback, new_sc);

- if (new_sc->state == CHANNEL_OPENED_STATE) {
- stor_device->stor_chns[new_sc->target_cpu] = new_sc;
- cpumask_set_cpu(new_sc->target_cpu, &stor_device->alloced_cpus);
+ /* In case vmbus_open() fails, we don't use the sub-channel. */
+ if (ret != 0) {
+ dev_err(dev, "Failed to open sub-channel: err=%d\n", ret);
+ return;
}
+
+ /* Add the sub-channel to the array of available channels. */
+ stor_device->stor_chns[new_sc->target_cpu] = new_sc;
+ cpumask_set_cpu(new_sc->target_cpu, &stor_device->alloced_cpus);
}

static void handle_multichannel_storage(struct hv_device *device, int max_chns)
{
+ struct device *dev = &device->device;
struct storvsc_device *stor_device;
int num_cpus = num_online_cpus();
int num_sc;
@@ -679,21 +683,11 @@ static void handle_multichannel_storage(struct hv_device *device, int max_chns)
request = &stor_device->init_request;
vstor_packet = &request->vstor_packet;

- stor_device->open_sub_channel = true;
/*
* Establish a handler for dealing with subchannels.
*/
vmbus_set_sc_create_callback(device->channel, handle_sc_creation);

- /*
- * Check to see if sub-channels have already been created. This
- * can happen when this driver is re-loaded after unloading.
- */
-
- if (vmbus_are_subchannels_present(device->channel))
- return;
-
- stor_device->open_sub_channel = false;
/*
* Request the host to create sub-channels.
*/
@@ -710,23 +704,29 @@ static void handle_multichannel_storage(struct hv_device *device, int max_chns)
VM_PKT_DATA_INBAND,
VMBUS_DATA_PACKET_FLAG_COMPLETION_REQUESTED);

- if (ret != 0)
+ if (ret != 0) {
+ dev_err(dev, "Failed to create sub-channel: err=%d\n", ret);
return;
+ }

t = wait_for_completion_timeout(&request->wait_event, 10*HZ);
- if (t == 0)
+ if (t == 0) {
+ dev_err(dev, "Failed to create sub-channel: timed out\n");
return;
+ }

if (vstor_packet->operation != VSTOR_OPERATION_COMPLETE_IO ||
- vstor_packet->status != 0)
+ vstor_packet->status != 0) {
+ dev_err(dev, "Failed to create sub-channel: op=%d, sts=%d\n",
+ vstor_packet->operation, vstor_packet->status);
return;
+ }

/*
- * Now that we created the sub-channels, invoke the check; this
- * may trigger the callback.
+ * We need to do nothing here, because vmbus_process_offer()
+ * invokes channel->sc_creation_callback, which will open and use
+ * the sub-channel(s).
*/
- stor_device->open_sub_channel = true;
- vmbus_are_subchannels_present(device->channel);
}

static void cache_wwn(struct storvsc_device *stor_device,
@@ -1794,7 +1794,6 @@ static int storvsc_probe(struct hv_device *device,
}

stor_device->destroy = false;
- stor_device->open_sub_channel = false;
init_waitqueue_head(&stor_device->waiting_to_drain);
stor_device->device = device;
stor_device->host = host;
diff --git a/drivers/scsi/vmw_pvscsi.c b/drivers/scsi/vmw_pvscsi.c
index 6e491023fdd8..0d6b2a88fc8e 100644
--- a/drivers/scsi/vmw_pvscsi.c
+++ b/drivers/scsi/vmw_pvscsi.c
@@ -1202,8 +1202,6 @@ static void pvscsi_shutdown_intr(struct pvscsi_adapter *adapter)

static void pvscsi_release_resources(struct pvscsi_adapter *adapter)
{
- pvscsi_shutdown_intr(adapter);
-
if (adapter->workqueue)
destroy_workqueue(adapter->workqueue);

@@ -1534,6 +1532,7 @@ static int pvscsi_probe(struct pci_dev *pdev, const struct pci_device_id *id)
out_reset_adapter:
ll_adapter_reset(adapter);
out_release_resources:
+ pvscsi_shutdown_intr(adapter);
pvscsi_release_resources(adapter);
scsi_host_put(host);
out_disable_device:
@@ -1542,6 +1541,7 @@ static int pvscsi_probe(struct pci_dev *pdev, const struct pci_device_id *id)
return error;

out_release_resources_and_disable:
+ pvscsi_shutdown_intr(adapter);
pvscsi_release_resources(adapter);
goto out_disable_device;
}
\
 
 \ /
  Last update: 2018-12-06 01:39    [W:0.030 / U:0.580 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site