lkml.org 
[lkml]   [2018]   [Dec]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v9 2/3] x86: add support for Huawei WMI hotkeys.
From
Date
On Mon, 2018-12-03 at 11:41 -0800, Randy Dunlap wrote:
> On 12/3/18 10:53 AM, Ayman Bagabas wrote:
> > This driver adds support for missing hotkeys on some Huawei
> > laptops.
> > Laptops such as the Matebook X have non functioning hotkeys.
> > Whereas
> > newer laptops such as the Matebook X Pro come with working hotkeys
> > out
> > of the box.
> >
> > Old laptops, such as the Matebook X, report hotkey events through
> > ACPI
> > device "\WMI0". However, new laptops, such as the Matebook X Pro,
> > does not have this WMI device.
> >
> > All the hotkeys on the Matebook X Pro work fine
> > without this patch except (micmute, wlan, and huawei key). These
> > keys
> > and the brightness keys report events to "\AMW0" ACPI device. One
> > problem is that brightness keys on the Matebook X Pro work without
> > this
> > patch. This results in reporting two brightness key press
> > events one is captured by ACPI and another by this driver.
> >
> > A solution would be to check if such event came from the "\AMW0"
> > WMI driver
> > then skip reporting event. Another solution would be to leave this
> > to
> > user-space to handle. Which can be achieved by using "hwdb" tables
> > and
> > remap those keys to "unknown". This solution seems more natural to
> > me
> > because it leaves the decision to user-space.
> >
> > Signed-off-by: Ayman Bagabas <ayman.bagabas@gmail.com>
> > ---
> > drivers/platform/x86/Kconfig | 16 +++
> > drivers/platform/x86/Makefile | 1 +
> > drivers/platform/x86/huawei-wmi.c | 226
> > ++++++++++++++++++++++++++++++
> > 3 files changed, 243 insertions(+)
> > create mode 100644 drivers/platform/x86/huawei-wmi.c
> >
> > diff --git a/drivers/platform/x86/Kconfig
> > b/drivers/platform/x86/Kconfig
> > index 87f70e8f4dd0..27db3ce7a1e1 100644
> > --- a/drivers/platform/x86/Kconfig
> > +++ b/drivers/platform/x86/Kconfig
> > @@ -1292,6 +1292,22 @@ config INTEL_ATOMISP2_PM
> > To compile this driver as a module, choose M here: the module
> > will be called intel_atomisp2_pm.
> >
> > +config HUAWEI_WMI
> > + tristate "Huawei WMI hotkeys driver"
> > + depends on ACPI_WMI
> > + depends on INPUT
> > + select INPUT_SPARSEKMAP
> > + select LEDS_CLASS
>
> but LEDS_CLASS is only available if NEW_LEDS is set/enabled, so it
> either
> depends on LEDS_CLASS... or it needs to select NEW_LEDS, which is
> what other
> drivers in this Kconfig file do, even though our b.d. has said a few
> times
> that any one driver should not "select" => enable an entire
> subsystem,
> so they all should be "depends on NEW_LEDS" IMHO.

Noted, I'll select NEW_LEDS just like other drivers in Kconfig.

>
> > + select LEDS_TRIGGERS
> > + select LEDS_TRIGGER_AUDIO
> > + help
> > + This driver provides support for Huawei WMI hotkeys.
> > + It enables the missing keys and adds support to the micmute
> > + LED found on some of these laptops.
> > +
> > + To compile this driver as a module, choose M here: the module
> > + will be called huawei-wmi.
> > +
> > endif # X86_PLATFORM_DEVICES
> >
> > config PMC_ATOM
>
>

\
 
 \ /
  Last update: 2018-12-04 16:30    [W:0.492 / U:0.304 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site