lkml.org 
[lkml]   [2018]   [Dec]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH 4/6] ARM: dts: sunxi: h3-h5: Add pinmux setting for CSI MCLK on PE1
On Fri, Nov 30, 2018 at 1:28 PM Chen-Yu Tsai <wens@csie.org> wrote:
>
> Some camera modules have the SoC feeding a master clock to the sensor
> instead of having a standalone crystal. This clock signal is generated
> from the clock control unit and output from the CSI MCLK function of
> pin PE1.
>
> Add a pinmux setting for it for camera sensors to reference.
>
> Signed-off-by: Chen-Yu Tsai <wens@csie.org>
> ---

On Fri, Nov 30, 2018 at 1:29 PM Chen-Yu Tsai <wens@csie.org> wrote:
>
> The CSI controller found on the H3 (and H5) is a reduced version of the
> one found on the A31. It only has 1 channel, instead of 4 channels for
> time-multiplexed BT.656. Since the H3 is a reduced version, it cannot
> "fallback" to a compatible that implements more features than it
> supports.
>
> Drop the A31 fallback compatible.
>
> Fixes: f89120b6f554 ("ARM: dts: sun8i: Add the H3/H5 CSI controller")
> Signed-off-by: Chen-Yu Tsai <wens@csie.org>
> ---

Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>

\
 
 \ /
  Last update: 2018-12-03 10:46    [W:0.588 / U:0.060 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site