lkml.org 
[lkml]   [2018]   [Dec]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: [RFC PATCH] ASoC: fsl: Add Audio Mixer CPU DAI driver
On Tue, Dec 18, 2018 at 04:30:01PM +0000, Viorel Suman wrote:
> This patch implements Audio Mixer CPU DAI driver for NXP iMX8 SOCs.
> The Audio Mixer is a on-chip functional module that allows mixing of
> two audio streams into a single audio stream.
>
> Audio Mixer datasheet is available here:
> https://www.nxp.com/docs/en/reference-manual/IMX8DQXPRM.pdf
>
> Signed-off-by: Viorel Suman <viorel.suman@nxp.com>
> ---
> .../devicetree/bindings/sound/fsl,amix.txt | 45 ++

This should be a separate patch.

> sound/soc/fsl/Kconfig | 7 +
> sound/soc/fsl/Makefile | 3 +
> sound/soc/fsl/fsl_amix.c | 554 +++++++++++++++++++++
> sound/soc/fsl/fsl_amix.h | 101 ++++
> 5 files changed, 710 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/sound/fsl,amix.txt
> create mode 100644 sound/soc/fsl/fsl_amix.c
> create mode 100644 sound/soc/fsl/fsl_amix.h
>
> diff --git a/Documentation/devicetree/bindings/sound/fsl,amix.txt b/Documentation/devicetree/bindings/sound/fsl,amix.txt
> new file mode 100644
> index 0000000..049144f
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/sound/fsl,amix.txt
> @@ -0,0 +1,45 @@
> +NXP Audio Mixer (AMIX).
> +
> +The Audio Mixer is a on-chip functional module that allows mixing of two
> +audio streams into a single audio stream. Audio Mixer has two input serial
> +audio interfaces. These are driven by two Synchronous Audio interface
> +modules (SAI). Each input serial interface carries 8 audio channels in its
> +frame in TDM manner. Mixer mixes audio samples of corresponding channels
> +from two interfaces into a single sample. Before mixing, audio samples of
> +two inputs can be attenuated based on configuration. The output of the
> +Audio Mixer is also a serial audio interface. Like input interfaces it has
> +the same TDM frame format. This output is used to drive the serial DAC TDM
> +interface of audio codec and also sent to the external pins along with the
> +receive path of normal audio SAI module for readback by the CPU.
> +
> +The output of Audio mixer can be selected from any of the three streams
> + - serial audio input 1
> + - serial audio input 2
> + - Mixed audio
> +
> +Mixing operation is independent of audio sample rate but the two audio
> +input streams must have same audio sample rate with same number of channels
> +in TDM frame to be eligible for mixing.
> +
> +Device driver required properties:
> +=================================
> + - compatible : Compatible list, contains "fsl,imx8qm-amix"
> +
> + - reg : Offset and length of the register set for the device.
> +
> + - clocks : Must contain an entry for each entry in clock-names.
> +
> + - clock-names : Must include the "ipg" for register access.
Humm, no audio related clocks?

> +
> + - power-domains : Must contain the phandle to the AMIX power domain node
> +
> +Device driver configuration example:
> +======================================
> + amix: amix@59840000 {
> + compatible = "fsl,imx8qm-amix";
> + reg = <0x0 0x59840000 0x0 0x10000>;
> + clocks = <&clk IMX8QXP_AUD_AMIX_IPG>;
> + clock-names = "ipg";
> + power-domains = <&pd_amix>;
> + };
> +

\
 
 \ /
  Last update: 2018-12-29 00:33    [W:0.396 / U:0.484 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site